LINATEX 808-PHB

Linatex ® Hard Wall Slurry Hose Bend (808-PHB) Technical Specifications Installation made easy The Linatex ® 808-PHB hard wall slurry hose bend range is renowned for its robust design and performance in delivering outstanding wear resistance in critical high wear applications. Manufactured to the same high standard as our 80\ 8 hard wall slurry hoses, our formed hose bends are custom produced to your required internal diameter, bend angle, radii and centre line to face requirements. The hot-vulcanised manufacturing process provides a made-to-order formed hose bend that is designed to fit the application without the need for excessive flexing. And the inbuilt swivel flanges make installation extremely easy. Our Linatex ® 808- PHB hard wall slurry hose bends are the product of choice for many customers. Design Features • Designed to achieve superior wear performance over traditional steel lined pipe bends • Lining thickness can be increased without reduction in the internal diameter • Available with an extensive array of diameters, bend angles and radii configurations and may be customised to your needs • Available with Linatex ®, Linacure ® or Linard ® abrasion resistant internal wear liners Properties • Nominal bores from 50mm (2”) up to 1150mm (45”)* • 1.5D, 3D and 5D bends fully interchangeable with pulled steel bends** • Operating temperature -30°C to +75°C (-22°F to +167°F) • Safety factor of 4:1 Minerals Applications Pumping and transfer of abrasive slurries under pressure: • Mineral processing plants • Sand and gravel plants • Tailings lines • Oil Sands * Custom internal diameters are also available. ** Product specifications are subject to regional variations. 45 degree slurry hose bend 90 degree slurry hose bend Typical Physical Properties - 3D Bends NOMINAL BORE (D) TYPICAL WEAR LINER THICKNESS RADIUS (R) 90 O (A)45 O (A) mm inmm in mm in mm in mm in 150 66¼ 457 18607 23.9 339 13.3 200 8 10 3?8 6 1024760 29.9 403 15.9 250 1010 3?8 762 30912 35.9 466 18.3 300 12 12 ½914 36111 4 43.9 579 22.8 350 1412 ½ 1067 42 1267 49.9 642 25.3 400 16 12 ½12 19 4814 19 55.9 705 27.8 450 18 12 ½ 1372 54 1572 61.9 76830.2 500 20 12½ 1524 60 1724 67.9 831 32.7 600 24 15 5?8 1829 72 2029 79.9 958 37.7 Copyright © 201?t&q0, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of W eir Engineering Services Limited. LINATEX, LINARD, LINACURE and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0143/201510 Weir Minerals info(!5?p@?!F www.f?4! (Ps Wear liner composition is critical to the performance of your Linatex ® rubber hose. With over 90 years of rubber manufacturing experience, we have the expertise to select the best compound for your specified application. Our superior Linatex ® rubber compounds provide your application with outstanding wear resistance and extended wear life. This is designed to achieve the lowest total cost of ownership for all our hoses. For more information, please refer to our range of Linatex ® rubber technical specification sheets.