Brochure du Surfcleaner® SCO 8000

Surfcleaner® SCO 8000 A proven oil surface separator for industrial wastewater treatment. Surfcleaner SCO 8000 operating in an API separator at a refinery.  Surfcleaner – the world’s first surface separator Surfcleaner benefits: Surfcleaner for oil water separation • Automatic removal, separation More than 40 Surfcleaner units have been in operation for almost two decades in the industrial and recovery of oil and other oil spill segment. We have served a variety of customers, including oil refineries, industries, hydrocarbons coast guards and industrial ports, for example: Sonatrach Raffineria Italiana, Exxon Mobil, • Able to handle different types of Preem Refinery, Esso Refinery, Ragn-Sells Group, Swedish Coast Guard, oil without adjustment, Ports of Stockholm and Midroc Environmental Services. including thin sheens • Can recover oil with a water content of less than 5% Conventional solutions are often manual, inefficient and • Capacity to collect and expensive separate up to 8,000 liters of oil per hour Today, a variety of traditional solutions, such as skimmers, barriers, chemicals, etc. are used to collect and/or remove oil in industrial wastewater treatment processes, with varying degrees of • Continuous operation 24/7 with minimal service efficiency. The majority of solutions do not have the capability to remove thin oil sheens, petrol requirements, even over long and diesel. periods of time • Energy and cost-efficient Surfcleaner – the Surface Separator operation with low maintenance , enabling substantial Automated and highly effective, Surfcleaner represents a solid contribution towards managing cost savings the global water surface pollution problem. It is a well-proven, energy efficient system that • Easy handling, installation and collects and separates pollutants from water surfaces. Easy to install, run and maintain, service Surfcleaner will automatically and continuously separate oil, petrol and diesel from the water • Quiet operation, ideal for surface. locations in noise sensitive The Surfcleaner technology is based on gravimetric separation, collecting both the carrier fluid areas and the top layer substance – allowing separation of the top layer substance, with a separation • SCADA-integration capacity of up to 8,000 liters per hour. Many of our customers that have installed Surfcleaners in • ATEX/EX certified for Zone 0 their API separator have a more cost effective and efficient solution to removing oil from the water surface. Advanced yet simple Surfcleaner is advanced yet ingeniously simple. The patented collection and separation process has been developed into a self-managing solution consisting of only two moving parts. The separated oil is discharged to an external storage tank. Disposal costs are minimized since the oil is recyclable. Surfcleaner has been developed through years of extensive research in close co-operation with customers. In addition to its impressive performance capabilities, it is durable, energy- efficient and easily maintained.  Surfcleaner SCO 8000 – facts and information 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 D D D D ~ 8 6 ~ 8 6 C C C C 0 WATER LEVEL 0 WATER LEVEL MIN WATER DEPTH MIN WATER DEPTH 0900001 10009 B B B B 1924 1924 All dimensions in millimeters. Surfcleaner SCO 8000 – technical data ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS DRAWN Adam 2022-03-26 CHECKED A TITLE DRAWN QA A General Adam 2022-03-26 CHECKED MFG A TITLE QA A APPROVED Separation capacity, incl. discharge: Up to 8,000 liters/h SIZE DWG N O REV MFG D SCO 8000 GEN.1 Viscosity: Up to 1,000 cP APPROVED SCALE1 / 8 SHEET 1 OF 1 8 7 6 5 4 SIZE DWG NO REV D 3 2 1 SCO8000 GEN.1 Density: 0.75 to 0.92 kg/liter SCALE1 / 8 SHEET 1 OF 1 8 7 6 5 4 3 2 1 Layer thickness: > 0.1 ?m Material: Stainless steel, Polyester Temperature limit - parts in air 0 to 50° C Temperature limit - parts in liquid 0 to 40° C (0 to 60° for ATEX) Dimensions Minimum depth: 1,000 mm Operational diameter: 1,924 m Weight: 250 kg Discharge pipe diameter: 160 mm Power and control Power: Three-phase, 400 V, 50 Hz, 4 A Siemens Control system: Simatic Control cabinet: 600 x 800 x 300 mm Motor cable length: 20 m (40m for ATEX) Sonar cable length: 20 m (40m for ATEX) Options ATEX/EX: Zone 0 (separator) Zone 1 (cabinet) certificate Supervision/SCADA: Many options available via special order  About Surfcleaner Surfcleaner designs, develops and manufactures the world’s first surface separators for removal, separation and recovery of contaminants floating on the water surface – oil, diesel, petrol, floating sludge, and more. The Surfcleaner technology is unique; by combining variations in inflow velocity and direction with gravimetric separation, the process is very efficient – keeping pollutants from accumulating on the Surfcleaner® surface and therefore help minimising greenhouse gas emissions. is a registered trademark. Surfcleaner makes it possible for water treatment plants to solve floating sludge problems and achieve a more effective and stable treatment process. We help refineries, industries and recycling companies to recover oil, diesel and petrol from contaminated water and significantly reduce VOC, CO and methane gas 2 emissions. Surfcleaners can also be used for swift removal of oil in ports, rivers, lakes, mines and oil pits. Customers include Sonatrach Raffineria Italiana, Ragn-Sells Group, Swedish Coast Guard, Preem Refinery, Esso, Exxon Mobil and Ports of Stockholm. The principle behind the technology is Dr Stig Lundbäck’s discovery of the human heart’s Dynamic Adaptive Piston Pump (DAPP) functionality. He built on this DAPP technology to invent and develop the Surfcleaner – he also applied other universal laws of physics from the nature and the universe, such as gravity, equilibrium, variation in rotation velocity in the center and the periphery, different density, and more. This makes the Surfcleaner a truly natural machine, working in concert with the laws of nature, instead of trying to combat them. The natural buouyancy sends the liquid in vertical and horizontal motion inside the body of the Surfcleaner. The Surfcleaner needs no pump, no powerpack, no hydraulics, no pneumatics. That is why the operation of the Surfcleaner is so efficient and cost- effective; we just put the forces of nature to work. Advanced yet ingeniously simple. Surfcleaner’s three-step technology: COLLECTION SEPARATION DISCHARGE The propeller in the bottom Deflection disks force the When the Surfcleaner has creates negative pressure, surface pollution and the collected enough surface causing the water and the water to the periphery. As pollution the propeller surface pollution to flow into the flow velocity drops, the reverses and, with the water the Surfcleaner. surface pollution floats acting as a piston, the surupwards while the water face pollution is discharged flows down through the into an external container. outlet. SCO8000-EN-2304 © Surfcleaner AB 2023 Surfcleaner AB info@surfcleaner.com surfcleaner.com