spécifications techniques du linatex soft wall slurry hose 806
détails techniques et applications du tuyau linatex 806
Contenu du document
Linatex® Soft Wall Slurry Hose (806)
Technical Specifications
Minerals
Applications
- Pumping and transfer of abrasive slurries under pressure for:
- Mineral sands stacker lines
- Sand and gravel transfer
- High pressure tailings lines
- Intake and discharge connectors
A durable and robust hose
The Linatex® 806 soft wall slurry hose is a durable, non-wire hose construction manufactured specifically for discharge applications. The construction allows for flexibility under pressure and removes the risk of permanent deformation that may occur through mishandling or over-flexing of the hose. The robust design delivers performance and reliability in the most arduous of mining applications and protects your site asset from early failure due to external damage.
We understand that each of our customers has unique and specific requirements, so each of our hoses is custom manufactured to suit the duty at hand. Our flexible design and manufacturing versatility allow us to provide customised internal diameters, lengths, design pressures, and end coupling arrangements.
Design Features
- Durable construction with high tensile reinforcement cord
- Allows for compression and rebound
- Inbuilt end connections
- Available with Linatex®, Linacure®, or Linard® abrasion-resistant internal wear liners
- Designed and manufactured to customer requirements
Properties
- Nominal bores from 50mm (2”) to 1000mm (40”)*
- Lengths up to 15m (50ft)**
- Operating temperature -35°C to +75°C (-31°F to +167°F)
- Discharge duties only
- Typical bend radius of 12D
- * Custom internal diameters are also available.
- ** Product specifications are subject to regional variations.
Wear liner composition is critical to the performance of your Linatex® rubber hose. With over 90 years of rubber manufacturing experience, we have the expertise to select the best compound for your specified application. Our superior Linatex® rubber compounds provide your application with outstanding wear resistance and extended wear life. This is designed to achieve the lowest total cost of ownership for all our hoses. For more information, please refer to our range of Linatex® rubber technical specification sheets.
Typical Physical Properties
TYPICAL WEAR
LINER THICKNESS
WORKING PRESSURE
| NOMINAL BORE | BEND RADIUS | |||||
| mm | in | mm | in | kPa | mm | ft |
| 50 | 2 | 6 | ¼ | 600 | 1.97 | |
| 80 | 3 | 6 | ¼ | 900 | 2.95 | |
| 100 | 4 | 6 | ¼ | 1200 | 3.94 | |
| 125 | 5 | 6 | ¼ | 1500 | 4.92 | |
| 150 | 6 | 6 | ¼ | 1800 | 5.91 | |
| 200 | 8 | 6 | ¼ | Atmospheric Pressure to 2400 kPa | 7.87 | |
| 250 | 10 | 10 | 3?8 | 3000 | 9.84 | |
| 300 | 12 | 10 | 3?8 | 5000 kPa | 11.81 | |
| 350 | 14 | 10 | 3?8 | 4200 | 13.78 | |
| 400 | 16 | 12 | ½ | 4800 | 15.75 | |
| 450 | 18 | 12 | ½ | 5400 | 17.72 | |
| 500 | 20 | 12 | ½ | 6000 | 19.69 | |
| 600 | 24 | 12 | ½ | 7200 | 23.62 |
Weir Minerals
Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX, LINARD, LINACURE, and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0144/025017
Contact: linatex@mail.weir
Website: www.minerals.weir
