Brochure_8_inoLab-Multi-IDS_1181-KB_INT-pdf

1 inoLab ® Multi IDS MEASURE pH, ORP, ISE, DISSOLVED OXYGEN, CONDUCTIVITY , BOD AND TURBIDITY — ACCURATE, COMPLIANT, SECURE 2 IDS- Secure the Future IDS The IDS concept from WTW: Intelligent, digital sen- sors for standard parameters pH, conductivity, dis- solved oxygen and turbidity. The IDS system is based on two components: digital sensors and correspond- ing field and benchtop meters. The outstanding innovation: The measurements are processed in the sensor, not in the meter. And in addition: As of now all IDS benchtop meters support wireless measurement The advantage of IDS • Processing of sensitive signals into fail safe digital data • Calibration records are stored in the sensor – in- dependently from any meter • Sensors provide important data for documentation • Wireless measurement with IDS wireless modules and the new IDS plug head sensors Proven sensor technology — now avail- able with plug head IDS Sensors are based on proven and continuously enhanced WTW sensors of the SenTix®, TetraCon® and Sensolyt® series and cover with a plus of precision and reliability almost any application. This applies also to the new plug head sensors. Free and connected — IDS goes wire- less New and unique wireless modules are responsible for secure, easy and reliable data transfer between plug head sensors and meter. Without cumbersome cables! NEW 3 intelligent: IDS sensors are smart. They log on automatically, transfer description, serial number, calibration re- cord and calibration history as well as their complete parameters. digital: IDS sensors process the sensitive signals into digital signals and transfer them fail-safe and error-free to the meter. No difference when using cable or wire- less modules. sensor: IDS Sensors are based on proven and continuously enhanced WTW sensors. They cover almost any ap- plication in pH, conductivity, dissolved oxygen and turbidity measurement. For more detailed information please visit our website: www.WTW.com/en/ids-wireless (For convenience use our QR code) . 4 inoLab® Multi 9630 IDS • Three universal measurement channels • Digital sensor recognition • Wireless ready inoLab® Multi 9620 IDS • Two universal measurement channels • Digital sensor recognition • Wireless ready The inoLab® Multi 9630 IDS and inoLab® Multi 9620 IDS are wireless ready high performance digital 3 or 2 channel benchtop meters. They have glass protected bright color display, a high-class zinc diecast lower housing and an anti-bacterial keypad. They allow the simultaneous measurement and documentation of up to two or three user-defined parameters. Securely traceable … … with the powerful inoLab® Multi 9630, 9620 IDS. 5 For more detailed information please visit our website : www.WTW.com/en/inolab-ids Flexible and high performance • Measures pH, ORP, ISE, dissolved oxygen, conduc- tivity and turbidiy • User-defined combinations of equal or different parameters • Color graphic display with CMC, QSC and chan- nel indicator • Optional adapter solution for conventional pH electrodes • Memory for 10,000 records Secure Measurement • Digital signal transfer eliminates electromagnetic interferences, allocates correct calibration data and provides sensor data • The intelligent sensor rating QSC shows visu- ally the actual condition of a pH electrode and increases operational reliability • Secure wireless connection by clear allocation of meter and sensors Documentation • Automatic digital recording of all sensor data for unique traceability of all values • Optional user administration for access control and documentation • Data output on PC, USB memory stick or selected printers Digital Sensor Recognition Ready for wireless measurement 6 Securely traceable … … with the innovative inoLab® Multi 9310 IDS. Documentation according to GLP/AQA • Automatic digital recording of sensor data for definite traceability of all values • Optional user administration for access control and documentation • Transfer of all data as .csv format via USB inter - face to a PC, Excel add-in for formatted input into spread sheet (Included in delivery or as down- load) • Output via optional built-in printer • Wireless ready inoLab® Multi 9310 IDS • Single channel multi-parameter for IDS sensors • Digital sensor recognition • Optional built-in printer For more detailed information please visit our website: www.WTW.com/en/inolab-ids The inoLab® Multi 9310 IDS with its single digital input is an outstanding introduction to digital multipa- rameter measurement with digital IDS electrodes. The IDS technology provides the easiest way to perfect measurements and efficient documentation. The inoLab® Multi 9310 IDS is wireless ready. 7 CondTurbidity pH ORP IDS sensors: Distinctively unique IDS sensor (selection) IDS plug head senor (selection) pH electrodes SenTix® 940 SenTix® 940-P SenTix® 950 SenTix® 950-P SenTix® 980 SenTix® 980-P SenTix® ORP-T 900 SenTix® ORP-T 900-P Conductivity cells TetraCon® 925 TetraCon® 925-P LR 925/01 LR 925/01-P Optical D.O. sensors FDO 925 FDO 925-P More IDS sensors for different applications can be found at www.WTW.com For more detailed information please visit our website: www.WTW.com/en/ids-sensors www.WTW.com/en/plug-head-sensors The IDS sensors – intelligent, digital sensors – com- bine proven measurement technique with additional advantages. Based on proven electrochemical WTW sensors but equipped with advanced measurement electronics the IDS sensors distinctively store their serial number and calibration records for immediate operation. IDS sensors not only store their data but also process the measurement signal and thus en- hance the quality of measured data. This allows the actual rating of electrode quality by the QSC (Qual- ity Sensor Control) function. The IDS sensors combine proven technology with new advantages • Premium, enhanced sensor technology combined with most advanced measurement electronics • IDS sensors store serial numbers and calibration history – ready for immediate operation • Current rating of sensor quality with IDS pH elec- trodes by QSC (Quality Sensor Control) • Plug head sensors are available for measurement with IDS wireless modules WTW Wissenschaftlich-Technische Werkstätten GmbH · Dr. -Karl- Slevogt-Straße 1 · D-82362 Weil heim Telefon: +49 881 18 3-0 · Fax: +49 88118 3-420 · E-Mail: Info.WTW@Xyleminc.com · www.WTW.com Alle Namen sind eingetragene Handelsnamen oder Warenzeichen der Xylem Inc. oder eines seiner Tochterunternehmen. Technische Änderungen vorbehalten. © 2014 WTW GmbH. 999096US April 2016 Accessory for IDS pH electrodes Precision buffers allow a clear evaluation of electrode quality during their life time. inoLab® Multi 9310 IDSinoLab® Multi 9620 IDSinoLab® Multi 9630 IDS Parameters pH, mV, D.O.(saturation, concentration, partial pressure, BOD), conductivity (specific resistance, salinity, TDS), temperature, turbidity Digital/IDS sensor ? ?? Sensor channels1 universal channel 2 universal channels 3 universal channels Analog pH/ORP sensors ADA S7/IDS (optional) ADA 94 pH/IDS (optional) Temp. compensation all except ORP all except ORP Calibration points pH ISE D.O. Conductivity Turbidity 1–5 – 1 1 3 1–5 2–7, adapter required 1 1 3 Calibration memory max. 10 max. 10 Calibration timer 1 – 999 days 1 – 999 days Memory manual: 500 data sets automatic: 4,500 data sets manual: 500 data sets automatic: 10,000 data sets Logger ? ? InterfaceMini USB-B USB-A, Mini USB-B GLP/AQS support ? ? Displayblack and white graphic display color graphic display Optional printer yes external Others CMC, QSC anti-bacterial keyboard, QSC, CMC Power supply universal power supply, batteries (4 x 1.5 V AA type) universal power supply Technical data Ordering Information Model Description Order No. inoLab® Multi 9310 Digital multiparameter benchtop meter for IDS sensors, for measurements/documentation according GLP/AQA. With single channel input for pH/mV, dissolved oxygen and conductivity. Single instrument with universal power supply, stand and operation manual, software and USB cable. 1FD350 inoLab® Multi 9310P Same as above, but with integrated thermal printer. 1FD350P inoLab® Multi 9620 Professional digital multiparameter benchtop meter for IDS sensors, for measurements/documentation according GLP/AQA. With dual channel input for pH/mV, dissolved oxygen and conductivity. Single instrument with universal power supply, stand and operation manual, software and USB cable. 1FD560 inoLab® Multi 9620 SET C Same as above , in set with IDS sensors: digital IDS pH electrode SenTix® 980, buffer 4, 7 and 10.01, 3 mol/l KCl, digital IDS conductivity cell TetraCon® 925, 0.01 mol/l KCl, conductivity standard. 1FD56C inoLab® Multi 9630 Professional digital multiparameter benchtop meter for IDS sensors, for measurements/documentation accord- ing GLP/AQA. With triple channel input for pH/mV, dissolved oxygen and conductivity. Single instrument with universal power supply, stand and operation manual, software and USB cable. 1FD570 inoLab® Multi 9630 SET K Same as above, in set with IDS sensors: digital IDS pH electrode SenTix® 980, buffer 4, 7 and 10.01, 3 mol/l KCl, optical IDS D.O. sensor FDO 925, digital IDS cond cell TetraCon® 925, 0.01 mol/l KCl, cond standard. 1FD57K ADA 94pH/IDS DIN pH/mV module for inoLab® Multi 9620/9630 IDS for pH/ORP/ISE electrodes with DIN- and 4 mm banana plug. Including mounting accessories. 108 131 ADA 94pH/IDS BNC pH/mV module for inoLab® Multi 9620/9630 IDS for pH/ORP/ISE electrodes with BNC- and 4 mm banana plug. Including mounting accessories. 108 132 QSC-Kit Set for initial pH calibration. 109 830 IDS WLM Kit Kit consisting of wireless module for sensor and meter (one of each), USB charger and universal USB power supply 108 144 SenTix® 980-P IDS pH combination electrode with liquid electrolyte (3 mol/l KCl), glass shaft and integrated temperature sen- sor. QSC function. Electrode with plug head for AS IDS/1.5 cable or wireless module. 103 762 TetraCon® 925-P 4-electrodes conductivity with graphite electrodes, epoxy shaft, cell constant 0.475 1/cm. Electrode with water - proof plug head for connection to a MPP IDS or AS/IDS-x 301716 LR 925/01-P 2-electrode-IDS conductivity cell with stainless steel electrodes, for ultrapure water, cell constant 0.1 cm–1, with plug head, glass flow trough vessel. 301 722 FDO 925-P Optical IDS dissolved oxygen sensor for field and lab applications with fast responding beveled membrane, pressure resistant up to 10 bars. Electrode with waterproof plug head for connection to a MPP IDS, AS/IDS-x, or wireless module 201 306