Sur l'hygromètre à miroir refroidi de PANAMETRICS, la sonde humide le capuchon a un petit trou et nous nous demandons si ce trou doit être aligné au trou inférieur sur la sonde ou décalé pour que ce soit fermé en fait?

OptiSonde ™ Chilled mirror hygrometer Key benefits Chilled mirror hygrometers are used in standards and metrology labs as well as in industrial applications where precise and repeatable humidity measurement and control are required. The inherent accuracy and long term stability provide many advantages over other types of humidity measurement technologies. • Compact and rugged design for easy installation and durability • Built-in data logger provides ability to record historical data • Sensor conveniently plugs into wall mount chassis for facility monitoring, eliminating the need to run cable • Sensors may be connected up to 91 m away via cable for remote monitoring • Displays and transmits in a variety of parameters, such as dew point, relative humidity, dry bulb, wet bulb, absolute humidity, volume ratio, and mass ratio, offering flexibility during operation • Digital (RS-232) interface for data integrity • Patented PACER® cycle automatically cleans mirror to ensure measurement integrity • PanaView™ software transfers data from the meter to a PC for additional storage and enables data to be viewed graphically • Easy to configure using the front panel for simple operation • Humidity measurements are traceable to National Institute of Standards and Traceability (NIST) Applications • Environmental test chambers • Engine test cells • Clean rooms • Air conditioning and heat exchange coil testing • Metrology labs The OptiSonde chilled mirror hygrometer is a National Institute of Standards and Technology (NIST) traceable humidity transfer standard at an exceptional value. The compact rugged analyzer is connected to either a single-or two-stage chilled mirror sensor and PRTD. Chilled mirrors are the humidity sensors of choice when laboratory and process measurements require high precision without long-term drift. An LCD indicates two simultaneous user-configured parameters. OptiSonde provides two user-configured analog (4 to 20 mA) outputs. The display and front panel keys enable quick and easy configuration. The OptiSonde easily records humidity and temperature data from a wide variety of applications. The analyzer is equipped with a data logger capable of recording for 100 days at a sample rate of 1 second and is equipped with an internal real-time clock. The saved data is uploaded to a PC using terminal software as ASCII delimited text, enabling it to be opened by Excel® and other spreadsheet programs for data reduction, graphing and statistical analysis. Theory of operation Chilled mirrors fundamentally measure the dew or frost point temperature by controlling a reflective surface to an equilibrium temperature between dew/frost formation and evaporation and precisely measuring the temperature of the mirror at this point. The chilled mirror sensors consist of a small polished hexagonal rhodium, or platinum mirror attached to a thermoelectric cooling module (TEC). OptiSonde’s servo controller applies current to the TEC, which causes the mirror to cool. The mirror is illuminated with a regulated Gallium Arsenide (GaAs) emitter that transmits light in the infrared spectrum. The light reflected by the mirror is received by a photo detector. When water vapor condenses on the mirror as water or frost (ice crystals), the light received by the photodetector is reduced due to scattering. This results in the servo controller reducing the power, causing the mirror to slightly warm. OptiSonde’s control system will modulate the amount of current flowing though the TEC to maintain a temperature where the rate of condensation and evaporation of water molecules and the mass of water on the mirror are constant. The resulting temperature of the mirror is then, by definition, equal to the dew or frost point temperature. A precision four-wire platinum RTD embedded in the mirror measures the temperature. The accuracy of the dew point measurement has been validated to an accuracy of ±0.2°C dew/frost point. Dry bulb temperature is measured with a precise four- wire 100W platinum RTD. The dew/frost point and dry bulb RTD resistance signals are conditioned and amplified by OptiSonde’s monitor to display and transmit dew/frost point and temperature. The cardinal measurements of dew/frost point and dry bulb temperature, along with pressure and molecular weight constants, are used to calculate other humidity parameters, such as relative humidity, wet bulb, ppmv, ppmw, absolute humidity, and water vapor pressure values using psychometric equations. The RTD sensor, which is embedded in the chilled mirror, never comes in contact with the process or test environment. The wetted parts consist of the platinum or rhodium mirror, Mylar® or stainless steel vapor barrier and epoxy sealant. The net result is drift free humidity measurement designed to maintain accuracy specifications for many years. Chilled mirrors require a nominal flow rate across the mirror to achieve the optimal dew/frost formation and response time. The sensor should either be installed in a duct with moving air or be equipped with a sampling pump. The optimum flow rate is 0.5 to 2.5 SCFH (0.25 to 1.2 L/min). Panametrics provides sampling systems to condition the temperature, regulate the pressure and filter process air before reaching the chilled mirror. Our applications engineers would be pleased to discuss your application in detail and provide a recommendation for the system best suited to your needs. Analog control Digiloop control GE developed Digiloop™ control to overcome the limitations of traditional analog PID (Proportional Integral and Derivative) control. Analog temperature control produces oscillations particularly at high or trace humidity levels. It is difficult to apply self-tuning or PID constants to analog control loops, which are over damped or under damped. Digiloop utilizes digital sampling and feed-forward control by taking time-based samples when the dew point is within a predetermined proportional band. By recording the oscillations, the digital control effectively predicts the magnitude of change and adjusts the current to the thermoelectric cooling module, which steps the mirror temperature in 0.09°F (0.05°C) increments. This results in a significantly improved control and dew point precision. PACER cycle Before PACER cycle After PACER cycle Optical balance OP AMm Gas flow Power Precision four-wire PRTD Thermoelectric cooling module Rhodium or platinum mirror Light emitting diodes Photo detectors LED regulation Thermoelectric heat pump control Contamination control and self-cleaning mirrors For environments where physical contaminants such as dust, oil mist and pollen are present, the use of a sampling system with a filter media is recommended. The filter media must be hydrophobic so as to not absorb or release water vapor into the test stream. Over time the mirror can be etched or pitted by particulates that lead to altering the light scattering characteristics. The mirrors are field replaceable. The standard rhodium mirror may be upgraded to platinum for industrial applications. The two stage sensors also utilize stainless steel wetted surfaces. PACER® (Program Automatic Error Reduction) is a patented contamination compensation scheme. The PACER cycle may be initiated manually or by programming a timed cycle. The cycle starts by capturing the data (during the PACER cycle a constant reading can be transmitted via the analog outputs) and cooling the mirror well below the dew point such that a thick dew layer forms on the mirror. The mirror is then rapidly heated. During the heating a significant amount of soluble and some non-soluble contamination is flash evaporated. The contamination left on the mirror tends to aggregate in “dry islands” or “spots”\ (much like a glass that comes out of a dishwasher). This process leaves approximately 85% of the mirror clean. The light signal received by the photodetector is compared against a reference LED/photodetector and the two signals are “balanced,” effectively negating the effect of the residual contamination left on the mirror. Before PACER cycle After PACER cycle Analog control Digiloop control GE developed Digiloop™ control to overcome the limitations of traditional analog PID (Proportional Integral and Derivative) control. Analog temperature control produces oscillations particularly at high or trace humidity levels. It is difficult to apply self-tuning or PID constants to analog control loops, which are over damped or under damped. Digiloop utilizes digital sampling and feed-forward control by taking time-based samples when the dew point is within a predetermined proportional band. By recording the oscillations, the digital control effectively predicts the magnitude of change and adjusts the current to the thermoelectric cooling module, which steps the mirror temperature in 0.09°F (0.05°C) increments. This results in a significantly improved control and dew point precision. PACER cycle Before PACER cycle After PACER cycle Cooling Heating Start of cycle End of cycle Mirror cools and coalesces (30 seconds) Mirror heats to dry state (90 seconds) Mirror returns to dew point (60 seconds) Data is sampled and held (3 minutesF Optical system automatically adjusts for correct reflectance (5 secondsF Prevailing dew point The PACER cycle works very well, but eventually manual cleaning may be required. All the chilled mirror sensor surfaces are accessible for manual cleaning. Cleaning is a simple process consisting of wiping the mirror with a cotton swab wetted with cleaning solution or distilled water. Calibration services Proper calibration is critical to the measurement integrity of your equipment. Comparing and adjusting the output of a device or sensor against a known reference standard ensures accuracy, reliability and repeatability. We provide a single source for initial start-up, programming and verification and for scheduled calibrations. The requirements of your application dictate the frequency of calibration and we will tailor a multi-year contract to your needs. We perform on-site calibrations that keep your equipment in your facility—minimizing downtime. This is a good alternative if you have more than one piece of equipment. Mail-in service to our modern calibration facilities provides a more controlled environment and NIST traceability. OptiSonde specifications OptiSonde Specifications Power •100 - 240 VAC, 50 to 60 Hz, 60 Watts • 18-32 VDC (bench top only) Enclosure Material •Wall mount: Cast aluminum • Bench top: Aluminum body with plastic front bezel Dimensions •Wall mount: 26.6 x 20.8 x 11.4 cm (h x w x d) • Bench top: 9.4 x 20.3 x 22.4 cm (h x w x d) Weight •Wall mount: 2.4 kg • Bench mount: 1.4 kg Ingress Protection Rating • Wall mount: IP-65 • Bench top: IP-20 Front Panel Keys •Rubber function keys—may be locked out via software Dew Point Range -- Dependent on sensor used Dew Point Accuracy ± 0.2°C dew/frost point Dew Point Repeatability 0.1°C Temperature Accuracy ±0.15°C Other Humidity Parameters The range and accuracy of absolute humidity (m H20 /v) and relative humidity (e/e sat) readings are based on the fundamental dew point and temperature measurements. The range and accuracy of mass (ppm w) and volume (ppm v) ratios are calculated based on the fundamental dew point measurement and pressure and gas molecular weight constants. Repeatability 0.05°C Display Two simultaneous parameters with 0.01°C resolution. “Dew Layer Thickness,” “Control,” “Alarm” and “Service” indicators Analog Output Two linear simultaneous parameters. 0/4 to 20 mA (isolated) with 250 W max load Alarm Form C (SPDT) 7 amp, 30 VDC (resistive load) Digital Interface RS-232 Cooling Slew Rate 1.5°C/sec Self Cleaning and Balancing Via patented PACER cycle. PACER may be programmed to run on an elapsed time or daily timer Operating Temperature Analyzer: -10°C to 60°C Data Logger Capable of recording eight parameters, time and date for a minimum of 100 days at sample rate of one second. Operating Humidity 0 to 95% RH non-condensing MTBF Five years of continuous operation Certifications CE Approval Electrical I/O Power: AC IEC receptacle for bench top and screw terminal blocks for wall mount. Chilled mirror sensor: keyed connector/cable. Temperature sensor, keyed connector/cable. RS-232: SUB-D-9. Analog Outputs: screw terminals Carrying Case Optional hard shell carrying case with die-cut foam for bench top unit and accessories 8.84 in (224.5 mm) 8 in (203.2 mm) 3.3 in (83.8 mm) 8.17 in (207.5 mm) 4.49 in (114 mm) 4 X Ø 0.38 in (9.7 mm) 2.86 in (72.6 mm) 7.8 in (198.1 mm) 10.48 in (266 mm) Bench top Wall mount 3.7 in (94 mm) Power • 100 - 240 VAC, 50 to 60 Hz, 60 watts • 18-32 VDC (bench top only) Enclosure material • Wall mount: Cast aluminum • Bench top: Aluminum body with plastic front bezel Dimensions • Wall mount: 26.6 x 20.8 x 11.4 cm (h x w x d) • Bench top: 9.4 x 20.3 x 22.4 cm (h x w x d) Weight • Wall mount: 2.4 kg • Bench mount: 1.4 kg Ingress protection rating • Wall mount: IP-65 • Bench top: IP-20 Front panel keys • Rubber function keys—may be locked out via software Dew point range — Dependent on sensor used Dew point accuracy ± 0.2°C dew/frost point Dew point repeatability 0.1°C Temperature accuracy ±0.15°C Other humidity parameters The range and accuracy of absolute humidity (mH20/v) and relative humidity (e/esat) readings are based on the fundamental dew point and temperature measurements. The range and accuracy of mass (ppmw) and volume (ppmv) ratios are calculated based on the fundamental dew point measurement and pressure and gas molecular weight constants. Repeatability 0.05°C Display Two simultaneous parameters with 0.01°C resolution. “Dew Layer Thickness,” “Control,” “Alarm” and “Service” \ indicators Analog output Two linear simultaneous parameters. 0/4 to 20 mA (isolated) with 250Ω max load Alarm Form C (SPDT) 7 amp, 30 VDC (resistive load) Digital interface RS-232 Cooling slew rate 1.5°C/sec Self cleaning and balancing Via patented PACER cycle. PACER may be programmed to run on an elapsed time or daily timer. Operating temperature Analyzer: -10°C to 60°C Data logger Capable of recording eight parameters, time and date for a minimum of 100 days at sample rate of one second. Operating humidity 0 to 95% RH non-condensing MTBF Five years of continuous operation Certifications CE Approval Electrical I/O Power: AC IEC receptacle for bench top and screw terminal blocks for wall mount. Chilled mirror sensor: keyed connector/cable. Temperature sensor, keyed connector/ cable. RS-232: SUB-D-9. Analog outputs: screw terminals Carrying case Optional hard shell carrying case with die-cut foam for bench top unit and accessories 1111H single stage chilled mirror specifications 1111H Single Stage Chilled Mirror Specifications Sensing Element Four-wire 1/3 Class A DIN 43760 PRT, 100Ω @ 0°C Dew/Frost Point Accuracy ± 0.2ºC Depression 45ºC at 25ºC, 1 atmosphere for standard air Typical Dew Point Measurement Range -15ºC to 25ºC Td at 25ºC, 1 atmosphere for standard air. (Equivalent to 6-100% RH) Sample Flow Rate 0.25 to 1.25 LPM (0.5 to 2.5 SCFH) Operating Temperature -15ºC to 80ºC Operating Pressure 0.8 to 15 bar (-3 to 200 psig) Power Derived from analyzer Sensor Body Epoxy-coated aluminum Filter PTFE filter optional (standard on 1111H-GE) Mirror Rhodium-plated copper (solid platinum optional) Vapor Barrier Mylar Sensor Wetted Material Epoxy-coated aluminum, rhodium copper, mylar Electrical Connector MS style multipin keyed connector Weight • 1.4 kg (1111H) • 1.8 kg (1111H-GE) Accessories • MB-11: Wall mounting bracket (1111H) • PTFE-GE: PTFE filter • Platinum mirror 1111 H-GE 3.5 in (89 mm) 1 in (25.4 mm) NPT 1.23 in (31 mm) 2.57 in (65 mm) 0.62 in (16 mm) Ø 1.2 in (30 mm) Sensing element Four-wire 1/3 Class A DIN 43760 PRT, 100Ω @ 0°C Dew/frost point accuracy ± 0.2ºC Depression 45ºC at 25ºC, 1 atmosphere for standard air Typical dew point measurement range -15ºC to 25ºC Td at 25ºC, 1 atmosphere for standard air. (Equivalent to 6-100% RH) Sample flow rate 0.25 to 1.25 LPM (0.5 to 2.5 SCFH) Operating temperature -15ºC to 80ºC Operating pressure 0.8 to 15 bar (-3 to 200 psig) Power Derived from analyzer Sensor body Epoxy-coated aluminum Filter PTFE filter optional (standard on 1111H) Mirror Rhodium-plated copper (solid platinum optional) Vapor barrier Mylar Sensor wetted material Epoxy-coated aluminum, rhodium copper, mylar Electrical connector MS style multipin keyed connector Weight • 1.4 kg (1111H) • 1.8 kg (1111H) Accessories • MB-11: Wall mounting bracket (1111H) • PTFE: PTFE filter • Platinum mirror 1111 H D2 two stage chilled mirror specifications D2 Two Stage Chilled Mirror Specifications Sensing Element Four-wire 1/3 Class A DIN 43760 PRT, 100 W @ 0ºC Dew/Frost Point Accuracy ± 0.2ºC Depression 65ºC at 25ºC, 1 atmosphere for standard air Typical Dew Point Measurement Range -35ºC to 25ºC Td at 25ºC, 1 atmosphere for standard air. (Equivalent to 1 to 100 % RH) Sample Flow Rate 0.25 to 1.25 LPM (0.5 to 2.5 SCFH) Operating Temperature -25ºC to 85ºC Operating Pressure 1 to 11 bar (0 to 150 psig) Power Derived from analyzer View Port Equipped with illuminated view port that enables observation of mirror Sensor Body Cast aluminum with 314 SS flow cell Mirror Rhodium-plated copper (solid platinum optional) Vapor Barrier Stainless steel Sensor Wetted Material 302, 314, 316 stainless steel, silicone O-ring, BK-7 glass, rhodium-plated copper or platinum mirror aluminum, rhodium copper, mylar, PTFE Inlet/Outlet 0.25 in (6.35 mm) OD tubing fittings Electrical Connector SUB-D-15 Weight 1.8 kg (4 lb) Accessories Platinum mirror Ø 0.107 in (4.75 mm) thru 4 places 0.25 in (6.35 mm) compression stainless steel 4.5 in (114 mm) square 4 in (102 mm) Sensing element Four-wire 1/3 Class A DIN 43760 PRT, 100W @ 0ºC Dew/frost point accuracy ± 0.2ºC Depression 65ºC at 25ºC, 1 atmosphere for standard air Typical dew point measurement range -35ºC to 25ºC Td at 25ºC, 1 atmosphere for standard air. (Equivalent to 1 to 100 % RH) Sample flow rate 0.25 to 1.25 LPM (0.5 to 2.5 SCFH) Operating temperature -25ºC to 85ºC Operating pressure 1 to 11 bar (0 to 150 psig) Power Derived from analyzer View port Equipped with illuminated view port that enables observation of mirror Sensor body Cast aluminum with 314 SS flow cell Mirror Rhodium-plated copper (solid platinum optional) Vapor barrier Stainless steel Sensor wetted material 302, 314, 316 stainless steel, silicone O-ring, BK-7 glass, rhodium-plated copper or platinum mirror aluminum, rhodium copper, mylar, PTFE Inlet/outlet 0.25 in (6.35 mm) OD tubing fittings Electrical connector SUB-D-15 Weight 1.8 kg (4 lb) Accessories Platinum mirror 1211H two stage chilled mirror specifications1211H Two Stage Chilled Mirror Specifications Sensing Element Four-wire 1/3 Class A DIN 43760 PRT, 100Ω @ 0°C Dew/Frost Point Accuracy ± 0.2ºC Depression 65ºC at 25ºC, 1 atmosphere for standard air Typical Dew Point Measurement Range -35ºC to 25ºC Td at 25ºC, 1 atmosphere for standard air. (Equivalent to 6 to 100% RH) Sample Flow Rate 0.25 to 1.25 LPM (0.5 to 2.5 SCFH) Operating Temperature -25ºC to 100ºC Operating Pressure 1-21 bar (0 to 300 psig) Power Derived from analyzer Sensor Body Cast aluminum with 314 SS flow cell Mirror Rhodium-plated copper (solid platinum optional) Vapor Barrier Mylar Sensor Wetted Material 302, 314, 316 stainless steel, silicone O-ring, rhodium plated copper or platinum mirror Inlet/Outlet 0.25 in (6.35 mm) OD tubing fittings Electrical Connector MS style multipin keyed connector Weight 1.8 kg (4 lb) Accessories Platinum mirror Stainless steel vapor barrier 1/4 in (6.35mm) Compression fitting 3.1 in (78.7 mm) 5 in (127 mm) 5.7 in (144.8 mm) 3.6 in (91.44 mm) 1211H Sensing element Four-wire 1/3 Class A DIN 43760 PRT, 100Ω @ 0°C Dew/frost point accuracy ± 0.2ºC Depression 65ºC at 25ºC, 1 atmosphere for standard air Typical dew point measurement range -35ºC to 25ºC Td at 25ºC, 1 atmosphere for standard air. (Equivalent to 6 to 100% RH) Sample flow rate 0.25 to 1.25 LPM (0.5 to 2.5 SCFH) Operating temperature -25ºC to 100ºC Operating pressure 1-21 bar (0 to 300 psig) Power Derived from analyzer Sensor body Cast aluminum with 314 SS flow cell Mirror Rhodium-plated copper (solid platinum optional) Vapor barrier Mylar Sensor wetted material 302, 314, 316 stainless steel, silicone O-ring, rhodium plated copper or platinum mirror Inlet/outlet 0.25 in (6.35 mm) OD tubing fittings Electrical connector MS style multipin keyed connector Weight 1.8 kg (4 lb) Accessories Platinum mirror Stainless steel vapor barrier SIM-12 heated two-stage chilled mirror specifications Sensing element Four-wire 1/3 Class A DIN 43760 PRT, 100 W @ 0°C Dew/frost point accuracy Standard: ±0.2°C Sensitivity ›0.03°C Repeatability ±0.05°C Hysteresis Negligible Cooling stages Two-stage TEC module Auxiliary cooling Not applicable Depression 85°C at 75°C body temperature and atmospheric pressure Typical measurement range -10°C to 75°C dew/frost point (Td) in air @ 75°C body temperature in 25°C ambient temperature and atmospheric pressure. Equivalent to 0.7% to 100% RH. Other parameters based on calculations. Sample flow 0.5 to 5.0 SCFH (0.25 to 2.5 L/min) Operating temperature -15°C to 100°C Heater control Thermostatically controlled. Set point of 25°C, 40°C, 55°C, 70°C, 85°C and 100°C Pressure 50 psig (4.5 bar) maximum 100/115/230 VAC, 50/60 Hz, 75 watts Sensor body Cast aluminum with 314 stainless steel flow cell Sensor wetted material 302, 316 stainless steel, silicone o-ring, BK-7 glass, rhodium or platinum mirror Mirror Standard: Rhodium plated copper Optional: Solid platinum Vapor barrier Mylar (upgradeable to stainless steel) Electrical connector MS-style multipin connector IEC receptacle for AC power Weight 7 lb (3.2 kg) net Accessories P Platinum mirror S Stainless steel vapor barrier HSS-12 Heated sampling system. SIM-12 heated chilled mirror, SIM-HFT heated filter module and SIM-HFM heated flowmeter mounted on a plate with SIM-HSL heated sample line. SIM-12 Heated Two- Stage Chilled Mirror Specifications Sensing Element Four-wire 1/3 Class A DIN 43760 PRT, 100 W @ 0°C Dew/Frost Point Accuracy Standard: ±0.2°C Sensitivity >0.03°C Repeatability ±0.05°C Hysteresis Negligible Cooling Stages Two-stage TEC module Auxiliary Cooling Not applicable Depression 85°C at 75°C body temperature and atmospheric pressure Typical Measurement Range -10°C to 75°C dew/frost point (Td) in air @ 75°C body temperature in 25°C ambient temperature and atmospheric pressure. Equivalent to 0.7% to 100% RH. Other parameters based on calculations. Sample Flow 0.5 to 5.0 SCFH (0.25 to 2.5 L/min) Operating Temperature -15°C to 100°C Heater Control Thermostatically controlled. Set point of 25°C, 40°C, 55°C, 70°C, 85°C and 100°C Pressure 50 psig (4.5 bar) maximum 100/115/230 VAC, 50/60 Hz, 75 watts Sensor Body Cast aluminum with 314 stainless steel flow cell Sensor Wetted Material 302, 316 stainless steel, silicone o-ring, BK-7 glass, rhodium or platinum mirror Mirror Standard: Rhodium plated copper Optional: Solid platinum Vapor Barrier Mylar (upgradable to stainless steel) Electrical Connector MS-style multipin connector IEC receptacle for AC power Weight 7 lb (3.2 kg) net Accessories P Platinum mirror S Stainless steel vapor barrier HSS-12 Heated sampling system. SIM-12 heated chilled mirror, SIM-HFT heated filter module and SIM-HFM heated flowmeter mounted on a plate with SIM-HSL heated sample line. 25 25 55 70 85 185 160 130 105 77 25 25 °C °F Max Dewpoint Outlet Ready ON Inlet °C °F Model SIM-12H Heated Sensor 0.25 in compression fitting 4 in (102 mm) 8.64 in (219 mm) 3.5 in (89 mm) 1311-DR four-stage chilled mirror specifications Sensing element Four-wire 1/3 Class A DIN 43760 PRT, 100 W @ 32°F (0°C) Dew/frost point accuracy Standard: ±0.2°C Sensitivity ›0.03°C Repeatability ±0.05°C Hysteresis Negligible Cooling stages Four-stage TEC module Auxiliary cooling Liquid cooling jacket Depression, air cooled 95°C at 25°C and atmospheric pressure Depression, liquid cooled 105°C with 15°C cooling water Typical measurement range • -65°C to 25°C dew/frost point (Td) in air @ 25°C and atmospheric pressure. • -75°C to 15°C in liquid-cooled mode with 15°C coolant. Other parameters based on calculations. Sample flow 0.5 to 5.0 SCFH (0.25 to 2.5 L/min) Operating temperature 0°C to 35°C Pressure 300 psig (22 bar) maximum Power 100/115/230 VAC, 50/60 Hz, 300 watts Sensor body Cast aluminum with 314 stainless steel flow cell Mirror Standard: Rhodium plated copper Optional: Solid platinum Sensor wetted material 302, 316 stainless steel, silicone o-ring, BK-7 glass, rhodium or platinum mirror Vapor barrier Mylar (upgradeable to stainless steel) Inlet/outlet 1/4 in (6 mm) OD tubing compression fittings Electrical connector MS-style multipin connector mates IEC receptacle for AC power Weight 34 lb (16 kg) net Accessories P Platinum mirror S Stainless steel vapor barrier 1311-DR Four- Stage Chilled Mirror Specifications Sensing Element Four-wire 1/3 Class A DIN 43760 PRT, 100 W @ 32°F (0°C) Dew/Frost Point Accuracy Standard: ±0.2°C Sensitivity >0.03°C Repeatability ±0.05°C Hysteresis Negligible Cooling Stages Four-stage TEC module Auxiliary Cooling Liquid cooling jacket Depression, Air Cooled 95°C at 25°C and atmospheric pressure Depression, Liquid Cooled 105°C with 15°C cooling water Typical Measurement Range •-65°C to 25°C dew/frost point (Td) in air @ 25°C and atmospheric pressure. • -75°C to 15°C in liquid-cooled mode with 15°C coolant. Other parameters based on calculations. Sample Flow 0.5 to 5.0 SCFH (0.25 to 2.5 L/min) Operating Temperature 0°C to 35°C Pressure 300 psig (22 bar) maximum Power 100/115/230 VAC, 50/60 Hz, 300 watts Sensor Body Cast aluminum with 314 stainless steel flow cell Mirror Standard: Rhodium-plated copper Optional: Solid platinum Sensor Wetted Material 302, 316 stainless steel, silicone o-ring, BK-7 glass, rhodium or platinum mirror Vapor Barrier Mylar (upgradable to stainless steel) Inlet/Outlet 1/4 in (6 mm) OD tubing compression fittings Electrical Connector MS-style multipin connector mates IEC receptacle for AC power Weight 34 lb (16 kg) net Accessories P Platinum mirror S Stainless steel vapor barrier Control Air Cooling Liquid Cooling ~ Input Power 1311DR 1.8 in (46 mm) 7.17 in (182 mm) Ø 0.31 in (7.9 mm) 4 places 8.77 in (223 mm) 16.3 in (414 mm) T-100 four-wire PRTD temperature sensor Sensing element Four-wire 1/3 Class A DIN 43760 PRT, 100W @ 0°C Accuracy 0.15ºC Range -100ºC to 100ºC Response time 7 seconds for 25ºC to 70ºC step change in fluid Sensor body material Stainless steel Cable PTFE insulation rated to 150ºC, 3 m (10 ft) length, spring strain relief Power Low voltage derived from analyzer Weight 0.9 kg (2 lb) Accessories PTFE: FILTER for 1111H Sensor • Hard shell carrying case for benchtop unit with accessories. • Calibration-multi-year • Extended warranty T-100 Four-wire PRTD Temperature Mirror Sensing Element Four-wire 1/3 Class A DIN 43760 PRT, 100 W @ 0°C Accuracy 0.15ºC Range -100ºC to 100ºC Response Time 7 seconds for 25ºC to 70ºC step change in fluid Sensor Body Material Stainless steel Accessories PTFE-GE: FILTER for 1111H Sensor • Hard shell carrying case for benchtop unit with accessories. • Calibration-multi-year • Extended warranty Cable PTFE insulation rated to 150ºC, 3 m (10 ft) length, spring strain relief Power Low voltage derived from analyzer Weight 0.9 kg (2 lb) Polytetrafluoroethylene cable 150?C, 10 ft (3 m) standard length Connector 0.25 in (6.35 mm) NPT 7.5 in (190.5 mmF Ø 0.25 in (6.35 mm) Ordering information Analyzer 1 Benchtop 2 Wall mount Power 1 100-240 VAC, 50-60 Hz 2 18-32 VDC Chilled mirror sensor 0 None 1 1111H single stage sensor, 1” M-NPT fitting 2 1111H single stage sensor. Flange for duct mounting and PTFE filter 3 D2 two stage sensor 4 1211H two stage high temperature and pressure sensor 5 SIM-12H two stage heated sensor. 115 VAC 6 SIM-12H two stage heated sensor. 230 VAC 7 HSS-12H two stage heated sensor and sampling system. 115 VAC 8 HSS-12H two stage heated sensor and sampling system. 230 VAC 9 1311-DR four stage chilled mirror sensor. 100 VAC A 1311-DR four stage chilled mirror sensor. 115 VAC B 1311-DR four stage chilled mirror sensor. 230 VAC Chilled mirror type 1 Rhodium 2 Platinum Chilled mirror sensor vapor barrier 1 Mylar 2 Stainless steel Analyzer to chilled mirror sensor cable 0 No cable 1111H fixed to wall mount 1 10 ft standard 2 25 ft 3 50 ft 4 100 ft 5 200 ft 6 300 ft Temperature sensor 0 100 affixed to wall mount 1 T-100 w/10 ft cable (standard) 2 T-100 w/25 ft cable 3 T-100 w/50 ft cable 4 T-100 w/100 ft cable 5 T-100 w/200 ft cable 6 T-100 w/300 ft cable Notes : 1. 1111H sensors are only available with mylar vapor barriers 2. D2 sensors are only available with stainless steel vapor barriers 3. Analyzer to sensor cable will be dependent on which analyzer (bench or \ wall) and sensor is ordered 4. All systems are standard dew point accuracy ±0.2°C Td and temperat\ ure ±0.15°C Ta 5. For 1111H affixed to wall mount, you must select 1111H and wall unit 6. For T-100 affixed to wall mount, you must select the wall analyzer 7. 18-32 VDC power supply is only available on bench top analyzer Panametrics, a Baker Hughes business, provides solutions in the toughest\ applications and environments for moisture, oxygen, liquid and gas flow \ measurement. Experts in flare management, Panametrics technology also reduces flare emissions and optimizes performance. With a reach that extends across the globe, Panametrics’ critical measurement solutions and flare emissions management are enabling customers to drive efficiency and achieve carbon reduction targets acros\ s critical industries including: Oil & Gas; Energy; Healthcare; Water and \ Wastewater; Chemical Processing; Food & Beverage and many others. Join the conversation and follow us on LinkedIn linkedin.com/company/panametricscompany panametrics.com Copyright 2021 Baker Hughes Company. All rights reserved. BHCS38799 (06/2021)