ADS-270

AERINOS TM ADS-270 LoRaWAN End Node Introduction ADS-270 is an ultra low power, battery powered end node for the LoRa network. The unit is available for the 868 to 869 MHz and 902 to 928 MHz bands. It incorporates two inputs, one digital with pulse counter capability and one analog, as well as multiple excitation options for powering transducers. The device supports acquisition of up to 8 measurement channels, based on the popular SDI-12 communication protocol and 8 channels, based on the MODBUS protocol. ADS-270 can send an unlimited amount of messages per day. The unit incorporates a Lithium Thionyl Battery supplying system operation for up to 10 years. Modes of operation Modes of operation include autonomous battery operation or power supply through the USB port for unit configuration. Features ? Autonomous LoRa End Node ? Up to 10 years maintenance free operation ? Quick and easy installation ? 1 digital input (counter), 1 analog input ? SDI-12 sensors support ? MODBUS sensors support Applications ? Security systems ? Building Management & Home Automation ? Oil & Gas distribution ? Asset management ? Greenhouse controls & irrigation systems ? M2M systems Technical characteristics Power supply Battery Internal 13.0 Ah Lithium Thionyl External 5V (USB power) Consumption 15?A max (Low power operation) 1mA (AI sampling w/o sensors) ~50mA (Uplink Messaging) Digital inputs 1, 0-30VDC or potential free contact inputs Analog inputs 1, 0-1VDC, 12bit resolution Counters 1, 40Hz max., common with DI1 Transducer 12V/250mA, 5V/200mA Excitation Serial port USB serial, 115200 bps RF Low-Power Long Range Transceiver 863-870 MHz Frequency Band Uplink data rate up to 300Kbps with FSK modulation Max output power 14dBm Antenna External 868 MHz Indications 1 LED, status Temperature -40°C…+65°C operating Protection IP66 Dimensions 124 x 79.5 x 70 mm, (with cable gland) Weight 0.3 kg Data Acquisition Data send rate and sensor warm-up time are user defineable. The device supports acquisition of up to 8 measurement channels, based on the popular SDI-12 communication protocol and 8 channels, based on the MODBUS protocol. Ultra low power standby mode followed by frequent data transmission can be selected to fit the application needs, while maximizing the battery life. Transducer excitation 12VDC & 5VDC excitation outputs are available for powering low power external sensors. Setup and programming The unit can be programmed locally through the USB port by using simple ASCII configuration commands. The command set features commands for configuring scaling parameters & timing parameters. Enclosure ABS enclosure (IP66) for in- and outdoor use. Infinite Informatics, Ltd. 1, Valaoritou Street GR-54626 Thessaloniki, Greece Phone: +30-2310-553545, Fax: +30-2310-552006 Email: sales@indinf.gr URL: www.infinite.com.gr, www.indinf.gr Representative - authorized dealer Firmware features Uplink message rate 1-144 per day Sensor Warm-up time 1-255 sec LoRa Power Index 1-5 SDI-12 Compliant to SDI-12 Version 1.2 MODBUS MODBUS RTU & ASCII protocol Programming ASCII command set Local setup via USB serial port Ordering information Code ADS-270