tsp_v10_vigi_e_nose

ONLINE GAS AND LIQUID ANALYZER EXPERTS WWW.CHROMATOTEC.COM vigi e-n o se * Online analysis and monitoring of odorous compounds Sulfur & VOC monitoring TSP V10 GAS ANALYZER GC 866 Chromatotec ® is specialized in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (%, ppm, ppb, ppt). Please visit our website for more details. Updated: April 2021 * Analytical solution for vigiODOR platform Model: V20022 (rack version) Model: V10022 (wall mounted version with gas generators) On-line applications: Fence line Odor control monitoring Deodorisation process Fugitive emission Process control / CIP Targetted compounds: Standard version: H2S / SO2 / MM / EM / DMS / DMDS / DES / Total VOC Upon request: TBM / NPM / MES / 2BM / IBM / NBM / THT / IPM Main markets: WWTP / Refineries / Petrochemicals / Gas process sites / Rendering plaints Ambiant / Industrial air monitoring Odor impact management TRS measurement Standards: ISO 19739:2004, DIN 51855/7 ASTM D 7493-08 Correlation with EN13 725 / ASTM 679-E04 H 2S SO 2 Total Reduced Sulfur Mercaptans tVOC Sulfides Odor Index Odor Unit (OUE/m 3) WWW.CHROMATOTEC.COM To contact us: sales@chromatotec.com Chromatotec ® is continuously improving its products, therefore these specifications are subject to change without notice NORTH AMERICAHouston - USA EUROPEBordeaux - FRANCE ASIA Beijing - CHINA Description : The vigi e-nose is the first analyzer able to track VOC & Sulfurs at ppb/ ppt levels. It is more sensitive than human nose. It is composed by one autoGC-ED (MEDOR® Electrochemical wet cell Detector) and PID for VOCs. Zero air generator included in the same box for autonomous operation. Principle: • Automatic sampling using a loop linked to sampling pump • Automatic loop injection on metallic capillary column • Isothermal gas chromatograph • Detection of all compounds eluting from the column performed by MEDOR® Detector: Electrochemical wet cell Detector which is SSD Sulfur Specific Detector. • Signal provided by reaction between the wet cell electrolyte and the sulfur compounds • PID dedicated for total VOC measurement. Key points: • Automatic calibration/validation of the data, with embeded permeation tube for sulfurs. No span gases required. • Continuous monitoring with automatic online sampling • Analytical performances: • Specific, linear and very sensitive to sulfur compounds • Results validation by automatic standard injection • Long term stability using detector installed in reservoir • Extremely low maintenance • Very long life time detector with electrolyte, up to 10 years • Low gas consumption, can be reduced in option • More than 10 years data storage • No cylinders required thanks to internal calibration tube and gas generators • Automatic control with process device • Intelligents system with tunable and interactive alarm levels • PID detector in addition to MEDOR® detector • Powerful VISTACHROM Chromatotec ® software: • Remote monitoring & injection control• Full traceability with on board archiving of results and chromato - grams• QC Set up and control of threshold alarms• Data export by MODBUS / 4-20 mA / 0-10 V• Time stamp results vigi e-n o se * Online analysis and monitoring of odorous compounds Sulfur & VOC monitoring Options: • Multiple stream selector (up to 16 streams with one analyser) • Portable olfactometer or lab olfactometer (EN 13725) • Modeling software with weather station for live odor/chemical impact • Complaints management with platform for automatic integration of per - ception of neighborhood • Explosion proof version Exp or Exd for ATEX, IECEx zone 1 and 2 and also for CSA C1D2 • Calculation modules (Average / Statistics / Odor unit OU e/m3 and more) • Automatic data transfert through: Module for 4 outputs 4-20mA / Modbus RTU or TCP IP • 24 V DC power supply • Electric selection valve to reduce air consumption • Wall mounted box • Nitrogen generator when standard used for calibration is different from DMS • Vigiodor: dispersion modeling software for odor impact Technical Specifications: Total VOC with PID detector Sulfur compounds analysis: • Speciation and Total Reduced Sulfur by sum (TRS): H2S, SO2, DMS, MM, DES, DMDS, EM compounds Detection limits*: • Sulfur detector: less than 1 ppb for H2S• TVOC PID detector: less than 10 ppb on DMS• 50 UO E/m 3 (limit of the olfactometer) • *more sensitive analyzers available upon request with special application Range (adjustable depending on application): • 0/10 or 0/100 or 0/1000 (ppb or ppm) • Calculation : Odor Index, TVOC, Total Sulfur, (OU e/m3 with XXXOU) Relative Standard Deviation for sulfur detector: • RSD < 3 % on concentration over 48H• RSD < 0.5% on retention time over 48H Relative Standard Deviation for PID: • < 1% on concentration at 100ppb over 24h Cycle Time for the following different analyses: • H2S, SO2, MM, EM, DMS, DMDS, DES 600s• With special application following compounds can be added : IPM, TBM, NPM, 2BM, IBM, NBM, MES and THT 1200s Supervisor: • Embeded computer Windows ® based with LCD display • 128 GB of Hardware storage on SSD memory Communication: • Ethernet, remote control Gas supply: • Carrier: Dry air or N2 (3 bars): ? 4 ml/min.• CALIB: in continuous ~ 50 ml / min.• CALIB during validation ~ 250ml/min for M52 configuration• Pneumatic valve 90ml/commutation • Sampling dryer: 150 to 200 ml/min Power supply: • Main: 230V 60Hz or 115V / 50Hz Electrical consumption: • 150 VA Dimensions and weights: Wall mounted box : • Height: 1440 mm • Width: 600mm• Depth: 300 mm• Net weight: From 45 to 70 Kg To order: vigi e-nose (rack version) vigi e-nose (wall mounted version) NH 3 analyzer associated (upon request) D27000 NH 3 sensor associated (upon request) XXXNH3 Model: V20022 V10022 Rack: 19’’ (5U)• Height: 222 mm • Width: 482mm• Depth: 660 mm• Net weight: 22 Kg