brochure du produit microF µ-F1-001
brochure du microF, un analyseur de formaldéhyde précis et portable
Contenu du document
µ-F1-001
ONLINE GAS AND LIQUID ANALYZER EXPERTS
microF
Accurate, portable & user friendly Formaldehyde analyzer
Model : µ-F1-001
Formaldehyde Applications
- Public buildings occupational exposure verification
- Industrial hygiene measurement
- Chambers tests studies
- Material emissions quantification
- Building management
- Medical studies
- Aqueous solutions analysis
- Concentrations levels continuous monitoring
Standards
- CE Certification:
- IEC/EN 61010-1:2010
- EN 61010-2-081:2015
- EMC: EN 61326-1
- ETV: LNE04003
Chromatotec® is specialised in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (ppm, ppb, ppt). Please visit our website for more details.
Updated: July 2021
WWW.CHROMATOTEC.COM
microF
Accurate, portable & user friendly Formaldehyde analyzer
Principle
microF is a compact Formaldehyde analyzer which allows continuous and real-time qualification and quantification of Formaldehyde.
- Continuous and real time monitoring.
- Temperature and relative humidity monitoring are included.
- Field portable
- Easy to use
- Labour saving
- Accuracy
- Highly sensitive
- Smart embedded software
Advantages
User friendly
- Compact size and low weight
- Deployment in less than 5 minutes
- Powered by mains or battery
- No carrier gas needed
- High filters lifetimes due to low air sample flow rate
- Low reagent volume & quantity of air sample are required
- Calibration from gas/liquid formaldehyde solution
- Compatibility with canisters and FLEC® System
Rapid & accurate measurements
- Real-time and continuous measurements
- Time resolution down to few seconds
- Detection limit lower than 10 ppb
- No interferences
- Gaseous & aqueous formaldehyde concentration measurement
Analysis programmation, monitoring & data logging
- Color touch screen with standard/expert users modes
- Sequence programmation
- Results in near real-time
- Temperature & relative humidity monitoring
- Data logging for quality control
- Complementary computer software for efficient & easy data processing
Issued from French academic research
- Innovation from CNRS & Strasbourg University
- Patented microfluidic device
- Supported by EU and innovation programs
Product technical specifications
Detection limit
- 10 ppb (with default settings)
Detection range
- 0 - 300 ppb (other range on request)
Measurement
- Detector: PhotoMultiplier
- Temporal resolution: 1 to 120 seconds
- Response time: 10 minutes (with default settings)
- Condition: Gas T°: 5 - 40°C; Gas RH: 20 - 80%; Atmospheric pressure
- Calibration: Gaseous Formaldehyde or liquid solution
Sampling
- Method: Continuous flow
- Gas flow rate: 0 - 30 mL min-1 (default setting 20 mL min-1)
- Gas flow rate uncertainty: ± (1.5% Read + 0.5% Full Scale)
- Liquid flow rate: 0 - 400 ?L min-1 (default setting 20 ?L min-1)
- Supply connection: 1/8’’ for gas; 1/16’’ for liquid
Instrument supply
- Power supply: Input 100 - 240V ±10%; 1.5 A max; 47 - 63 Hz / Output 15V; 6.67A 100W
- Battery life: Lithium-Ion / Autonomy > 2h
- Power consumption: max 75 w
General
- Dimensions: 32×28×15 cm with & 32×36×15 cm without bottle holder / 6.5 kg including bottle holder
- Operational conditions: 0 - 40°C / 20 - 80% RH
- Storage conditions: 0 - 40°C / 0 - 85% RH
- Display: 7” TFT display; resolution 800 x 480; integrated touchscreen
Software & communication
- Expert and standard modes; Data saving; Analysis setting, launching, and monitoring; Defects and maintenance management
- USB: Data transfer (area, retention time, concentration)
- Ethernet: Communication and remote control
Mobility and accessories
- Carrier case with handle and integrated pre-cut foam for accessories
- DNPH tubes and rings; Power supply & cable; Particle filter; Filter strainer; Carrier case with pre-cut foam; Microporous tube; 100 mL bottles with each storage and analysis caps with ferrules, 1/8’’ & 1/16’’ inox caps with associated ferrules; Teflon tubes and associated ferrules; Bottle holder; Stylus.
Other feature
- Canister & FLEC® system
Options
- Sampling teflon line (OD: 1/8’’; L: 150 cm); Spanner (10 - 11 mm); Printed manual.
For ordering
Model: Micro F µ-F-001
Chromatotec® is continuously improving its products, therefore these specifications are subject to change without notice
To contact us: sales@chromatotec.com
NORTH AMERICA: Houston - USA
EUROPE: Bordeaux - FRANCE
ASIA: Beijing - CHINA
WWW.CHROMATOTEC.COM
