brochure sur l'analyseur portable microBTEX µ-BTEX-001

µ-BTEX-001
ONLINE GAS AND LIQUID ANALYZER EXPERTS
microBTEX: Accurate, portable & user friendly BTEX analyzer

Applications

• Public buildings occupational exposure verification
• Industrial hygiene measurement
• Chambers tests studies
• Material emissions quantification
• Building management
• Concentration levels continuous monitoring

Standards

• IEC/EN 61010-1:2010
• EMC: NF EN 61326-1:2013

Chromatotec® is specialised in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (ppm, ppb, ppt). Please visit our website for more details.

Updated: July 2021

MicroBTEX is a compact BTEX analyzer which allows continuous and real-time qualification and quantification of Benzene, Toluene, Ethylbenzene, and Xylene. It is field portable, easy to use, labour-saving, highly sensitive, and provides real-time continuous monitoring with smart embedded software.

Advantages

• User friendly
• Compact size and low weight
• Deployment in less than 5 minutes
• Powered by mains or battery
• Low consumption of carrier gas
• Rapid calibration with gaseous BTEX mixture or only Toluene
• Compatibility with canisters and FLEC® System

Rapid & accurate measurements

• Short time of analysis: 10 minutes
• Detection limit lower than 1 ppb for benzene

Analysis, programmation, monitoring & data logging

• Color touch screen with standard/expert users modes
• Sequence programmation
• Results in near real-time
• Data logging for quality control

Issued from French academic research

• Innovation from CNRS & Strasbourg University
• Patented microfluidic device
• Supported by EU and innovation programs

Product technical specifications

• Detection limit: Benzene & Toluene: ~ 1 ppb, Ethylbenzene & m+p-Xylenes: ~ 2 ppb (with default settings) / o-Xylene: ~ 4 ppb
• Detection range: 0 - 1000 ppb
• Measurement: Detector : PID, Temporal resolution 0.1 seconds, Response time : One measurement every 10 minutes (with default settings), Analysis condition: Gas T°: 5 - 40°C; Gas RH: 20 - 80%; Atmospheric pressure, Calibration: Gaseous BTEX mixture or gaseous Toluene

Sampling

• Method: loop of 200?L
• Gas flow rate: Few 10 to few 100 mL min-1
• Carrier gas: Nitrogen 1 - 4 bar (default setting 4 bar/ 2.5 mL min-1)
• Supply connection: 1/8’’

Instrument supply

• Power supply: Input 100 - 240V ±10%; 1.5 A max; 47 - 63 Hz - Output 15V; 6.67A 100W
• Battery life: Lithium-Ion / Autonomy > 4h (2x12 volt)
• Power consumption: max 75 w

General

• Dimensions: 32×28×15 cm; 6.0 kg
• Operational conditions: 0 - 40°C / 20 - 80% RH
• Storage conditions: -20°C - +40°C / 0 - 85% RH
• Display: 7” TFT display; resolution 800 x 480; integrated touchscreen

Software & communication

• Embedded software: Expert and standard modes; Data saving; Analysis setting, launching and monitoring; Defects and maintenance management.
• USB: Data transfer (area, retention time, concentration)
• Ethernet: Communication and remote control

Mobility and accessories

• Carrier case with handle and integrated pre-cut foam for accessories

Options

• Sampling Teflon line (OD: 1/8’’; L: 150 cm); Printed manual
• Model PID in standard for BTEX and in option for VOC like methanol ETO, THT...
• Model TCD in option for H2, O2, N2, CO, CO2, CH4...

Other feature

• Compatibility: Canister & FLEC® system

Chromatotec® is continuously improving its products, therefore these specifications are subject to change without notice.

To contact us: sales@chromatotec.com

Contact

• NORTH AMERICA: Houston - USA
• EUROPE: Bordeaux - FRANCE
• ASIA: Beijing - CHINA

Visit www.chromatotec.com for more details.