tsp_a21_airmoVOC_C6C12

ONLINE GAS ANALYZER EXPERTS WWW.CHROMATOTEC.COM airmoV O C C6-C12 BTEX included Analysis of up to 53 compounds from C6 to C12 and halogen compounds (TO14) or (PAMS). TSP A21 Chromatotec ® is specialised in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (ppm, ppb, ppt). Please visit our website for more details. GAS ANALYZER GC 866 Updated: May 2019 1996 2006 2010 Selected by US EPA Model: A21022 Tri-methylbenzene MTBE BTEX Styrene Naphtalene CHCL3 CCL4 Environment: Urban/Non urban area pollution control Indoor measurements BTEX / PAMS / CE analysis Plant / process emissions Process: Industrial Hygiene Fence line monitoring Other applications: Wastewater plant, Purge and trap (method 502-2 or 524), Ambiant air control (PAMS and TO14) 2015 EN 14662-3 EN 15267-1 EN 15267-2 Certified WWW.CHROMATOTEC.COM To contact us: sales@chromatotec.com airmoV O C C6-C12 BTEX included Analysis of up to 53 compounds from C6 to C12 and halogen compounds (TO14) or (PAMS). NORTH AMERICAHouston - USA EUROPEBordeaux - FRANCE ASIA Beijing - CHINA Chromatotec ® is continuously improving its products, therefore these specifications are subject to change without notice Product technical specifications: C6 to C12 analysis: • C6 (Hexane, Dimethylbutane) to C10 (Diethylbenzene, Naphtalene) and dodecane Detection limit: • Tri-methylbenzene: 10 ppt or 0.05 µg/m 3 • Benzene: 10 ppt in standard 1 ppt with airmoVOC Expert Detection range: • 0.05 to 45 µg/m 3 for Tri-methylbenzene and Benzene - (A3) • 0,50 to 400 µg/m 3 for Tri-methylbenzene and Benzene - (A2) Note: Be careful with total mass and mass by compounds. Amplification 1: On demand to decrease the sampling volume. Relative Standard Deviation: • < 0.3 % over 48h (RT) • < 3 % over 48 h (Conc.) Results: • Data storage • MODBUS / JBUS communication protocol (option) Cycle time: • 15 min, 30 min, 40 min, 60 min Gas supply: • H2 (FID and carrier gas): 30 ml/min (inlet 2 bars; 1/16’’ swagelock)• Air (FID): 180 ml/min (inlet 3 bars ; 1/8’’ swagelock) • Sample inlet (vacuum pump) 1/4’’ swagelock Sample volume: • 30 to 700 ml (programmable) Power supply: • Main: 230 V / 115 V or 50 Hz / 60 Hz • Battery: 24 V (option) Electrical consumption: • Mean: 150 VA, Peak 360 VA Dimensions and weight: • Rack: 19’’ - (5U) • Height: 222 mm• Width: 482 mm• Depth: 600 mm• Net Weight: 22 kg Principle: The airmoVOC C6-C12 uses a valve with 1 sample trap, and a metallic capillary column . • Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19 ’’-rack 5U : • Uninterrupted sampling with pre-concentration on 1 absorbent tube • Gas chromatograph with 0.2 mm ID metallic column and program - mable temperature gradient oven and pressure / flowcontrol of the carrier gas by piezo-valve Before delivery the analyser is tested for one week by our quality contr\ ol department.The Vistachrom software enables the user to visualize and store data on a PC. Furthermore it enables the user to recalculate, calibrate \ the instrument export data and to set-up measurement. The software allows the calculation of retention time, area, mass or concentration profiles. Options: • On-line results are transmitted via: MODBUS / JBUS or MGS1 communication protocol • AirmoVOC Expert 1 ppt • Automatic validation and calibration with internal CALIB • 24 V power supply • Hydrogen and zero air generator for transportable analysers • Multiplexer: 2 to 32 • Purge module to extract VOC from water for online VOC in water analysis • Internal or external multipoint calibration and zero with CALIB MFC, XXXCYL MFC, airmoCAL MFC or airmoCAL D • Up to C16 with airmoVOC C6C16 To order:airmoVOC C6-C12 5U inbuilt computer Model:A21022 For more information, consult our Case Study Ambient air monitoring like : airmOzone 88, airmOzone + DET QMS 96 from PAMS-TO14, Car painting line, airmoTWA, airmoVOC BTEX