brochure sur le gas analyzer gc 866 airmoVOC C2-C6

TSP A11
ONLINE GAS ANALYZER EXPERTS

GAS ANALYZER GC 866: airmoVOC C2-C6
Designed for analysis + monitoring of “light” hydrocarbons.
It is used for the measurement of volatile hydrocarbon in the range of C2 to C6 i.e. from Ethane through 1,3-Butadiene up to Benzene (and other C6 compounds).

• Model: A11000
• Environment: Urban / Non urban area pollution control, Indoor measurements, BTEX / PAMS / CE analysis, Plant / process emissions.
• Toxicity: Benzene, 1,3-butadiene
• VOC screening of CO2 quality for the food and beverage industry
• Process: Industrial Hygiene, Fence line monitoring, Acetaldehyde/benzene
• Selected by US EPA: 1996, 2006, 2010

Chromatotec® is specialised in VOC, Sulfur and permanent gases analysis at trace and ultra trace levels (ppm, ppb, ppt).
Please visit our website for more details. Updated: May 2019
WWW.CHROMATOTEC.COM

airmoVOC C2-C6

Designed for analysis + monitoring of “light” hydrocarbons. It is used for the measurement of volatile hydrocarbon in the range of C2 to C6 i.e. from Ethane through 1,3-Butadiene up to Benzene (and other C6 compounds).

Principle:

The instrument uses a 6-port valve with a single sorbent trap, and a metallic capillary column.
Light COV analysis: It has a minimum detection level as low as 15 ppt (i.e.1,3-Butadiene) in ambient air, and analyses up to 32 compounds during a single analysis.
The airmo VOC C2 – C6 uses a thermoelectric cooling system to control the temperature of the sample trap when required, for example for the analysis of Ethyne.
Miniaturization, sensitivity, mobility and flexibility are its main features.
Everything from the sample port up to the data storage is integrated in a 19" rack 4U.
Programmed gradient temperature of the oven and pressure/flow control of the carrier gas by the piezo-valve.
Before delivery, the analyser is tested for one week by our quality control department.
The Vistachrom software enables the user to view and store data on a PC. It provides user-friendly utilities to recalculate, calibrate and export data and to configure the measurement. The software allows the calculation of retention time, area, mass and/or concentration profiles.

Example of analysed VOC’s:

• PAMS Photochemical Assessment Monitoring Stations USA AIRS
• Ethane C2, Ethylene/Ethene, Acetylene/Ethyne, Propane C3, Propylene/Propene, iso-butane (2-methyl propane), N-butane C4, 1-butene, Iso-butene (2-methyl propene), Trans-2-butene, Propyne, Cis-2-butene, 1,3-butadiene, Cyclopentane, iso-pentane (2-methyl butane), N-pentane C5, 1-pentene, Trans-2-pentene, Cis-2-pentene

Product technical specifications:

• Detection limit: 15 ppt for 1,3-Butadiene or 33 ng/m3
• Detection range: 0.5 to 100 PPB/amplification3 in standard
• Relative Standard Deviation: < 0.3 % over 48h (RT), < 2 % over 48 h (Conc.)
• Results: Data storage, 4-20mA current output (option), MODBUS / JBUS or MGS1 communication protocol (option)
• Cycle time: 30 min as standard (20 min. optional)
• Gas supply: H2 (FID and carrier gas): 30 ml/min (inlet 2 bars; 1/16" swagelock), Air (FID): 180 ml/min (inlet 3 bars; 1/8" swagelock), Sample inlet (vacuum pump) 1/4" swagelock
• Sample volume: 20 to 240 ml (programmable)
• Power supply: Main: 230V / 115V or 50 Hz / 60Hz, Battery: 24V (option)
• Electrical consumption: Mean: 150 VA, peak 360 VA
• Dimensions and weight: Rack: 19" - (4U), Height: 180mm, Width: 482mm, Depth: 600mm, Net weight: 17 Kg

Options:

• On-line results are transmitted via a MODBUS / JBUS or MGS1 communication protocol
• Analog output 4-20 mA or 0-10 V
• Automatic validation / calibration
• 24 V power supply
• Hydrogen and zero air generator for transportable analysers.
• Multiple Stream selector (2 to 6)

Chromatotec® is continuously improving its products; therefore, these specifications are subject to change without notice. To contact us: sales@chromatotec.com

Contact Information:

NORTH AMERICA: Houston - USA
EUROPE: Bordeaux - FRANCE
ASIA: Beijing - CHINA
WWW.CHROMATOTEC.COM