PEGA102022A0

Price List Components Gas Analysis www.buehler -technologies.com Version P EGA 10 202 2A0 Valid from 01. 10 .20 22 Bühler Technologies GmbH PEGA 10 202 2A0 Bühler Price List Gas Analysis Components Release date: 01. 10 .20 22 All rights reserv ed. Bühler Technologies GmbH 202 2 Bühler Technologies GmbH, Harkortstr. 29, D -40880 Ratingen Tel. +49 (0) 21 02 / 49 89 -0, Fax: +49 (0) 21 02 / 49 89 -20 Internet: www.buehler -technologies.com E-Mail: analyse@buehler -technologies.com Price List 10 /202 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 3 of 161 Content 1 Sample gas probes ................................ ................................ ................................ ....... 9 1.1 GAS 222, unheated probes ................................ ................................ ................................ .......... 9 1.1.1 GAS 222.10, unheated, downstream filter, applicable for dust up to approx. 2g/m³ .................... 9 1.1.2 GAS 222.11/30/35U, unheated, blowback for dust up to approx. 200g/m³ ................................ 10 1.1.3 GAS 222.11/30/35U, ANSI/CSA, unheated, blowback for dust up to approx. 200g/m³ .............. 11 1.2 GAS 222.20 DH, steam heated, downstream filter, applicable for dust up to approx. 2 g/m³ . 12 1.3 GAS 222, heated gas probes ................................ ................................ ................................ ..... 13 1.3.1 GAS 222.15/17/20, heated, downstream filter, applicable for dust up to approx. 2 g/m³ for sa fe area 13 1.3.2 GAS 222. 21/31/35, heated, back purge, applicable for dust up to approx. 200g/m 3, for safe area 14 1.3.3 GAS 222. 21/31/35, ANSI/CSA, heated, back purge applicable for dust up to approx. 200g/m 3, for safe area ................................ ................................ ................................ ................................ ........ 15 1.4 GAS 222, unheated sample probe for hazardous area ................................ ............................. 16 1.4.1 GAS 222.10, unheated, downstream filter, applicable for dust up to approx. 2g/m³, for hazardous area ................................ ................................ ................................ ................................ .... 16 1.4.2 GAS 222.11/30/35U, unheated, purge back, applicable for dust up to approx. 200g/m 3, for hazardous area ................................ ................................ ................................ ................................ .... 16 1.4.3 GAS 222.11/30/35U, ANSI/CSA, unheated, purge back, applicable for dust up to approx. 200g/m 3, for hazardous area ................................ ................................ ................................ ................ 18 1.5 GAS 222, probes for hazardous areas zone 1 (Atex & IECEx) ................................ ................. 19 1.5.1 GAS 222.20 Ex1, heated, downstream filter, applicable for dust up to approx. 2g/m 3, downstream filter, for hazardous areas ................................ ................................ ................................ . 19 1.5.2 GAS 222.21/31/35 Ex1, heated, downstream filter, applicable for dust up to approx. 2g/m 3, for hazardous areas ................................ ................................ ................................ ................................ .. 20 1.6 GAS 222, probes for hazardous areas zone 2 (Atex, IECEx & Cl1 Div.2) ................................ . 21 1.6.1 GAS 222.11/30/35U Ex2, unheated, blowback for a dust content up to approx. 200g/m³, for hazardous areas ................................ ................................ ................................ ................................ .. 21 1.6.2 GAS 222.20 Ex2, heated, downstream filter, applicable for a dust content of up to approx. 2g/m³, for hazardous areas ................................ ................................ ................................ .................. 22 1.6.3 GAS 222.21/31/35 Ex2, blowback, heated, applicable for a dust content up to approx. 2g/m³, for hazardous areas ................................ ................................ ................................ ................................ .. 23 1.6.4 GAS 222.20 Atex 2 for zone 2 and GAS Amex for Class I Div. 2, heated, downstream filter, applicable for a dust content of up to approx. 2g/m³ ................................ ................................ .............. 24 1.6.5 GAS 222.21/31/35 Atex 2 for zone 2 and GAS Amex for Class I Div. 2, heated, downstream filter, applicable for a dust content of up to approx. 2g/m³ ................................ ................................ ..... 25 1.7 GAS 222.15 -MA probe for marine application ................................ ................................ ........... 26 1.7.1 GAS 222.15 -MA, heated, downstream filter, for vibrating applications ................................ ...... 26 1.8 Gas Probes for special applications ................................ ................................ ......................... 27 1.8.1 High temperature Probe Gas 222.20 -HT ................................ ................................ .................. 27 1.8.2 GAS 222.20 DENOX, heated, applicable for dust up to approx. 2g/m 3, Adjustable up to 280 °C with Pt100 ................................ ................................ ................................ ................................ ............ 28 1.8.3 Sample Gas Probe Denox -MB, heated, with downstream filter inside GfP housing, for dust loads up to 2g/m 3, adjustable up to 280 °C with Pt100 ................................ ................................ .......... 29 1.9 Accessories ................................ ................................ ................................ ................................ 30 1.9.1 Sample tubes for GAS 222.1_ / 222.2_ ................................ ................................ .................... 30 1.9.2 Filter elements for GAS 222.1_ / GAS 222.2_ ................................ ................................ .......... 33 1.9.3 Filter elements for GAS 222.11 / .21 / .3_ ................................ ................................ ................ 34 1.9.4 Protection shields ................................ ................................ ................................ .................... 36 1.9.5 Extensions ................................ ................................ ................................ .............................. 36 1.9.6 Extens ions with ANSI flange and CSA approval ................................ ................................ ....... 38 Price List 10 /202 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 4 of 161 1.9.7 Diverse accessories ................................ ................................ ................................ ................ 38 1.10 Blowback systems ................................ ................................ ................................ ..................... 39 1.10.1 Blowback control unit ................................ ................................ ................................ ............... 39 1.10.2 Adapter flanges ................................ ................................ ................................ ....................... 39 1.10.3 Male connections ................................ ................................ ................................ .................... 40 1.10 .4 Sample gas probes Series ECO ................................ ................................ .............................. 41 1.10.5 Sample gas probes Series APO ................................ ................................ .............................. 41 2 Sample gas pumps ................................ ................................ ................................ ...... 42 2.1 Sample gas pumps for hazardous areas (ATEX) ................................ ................................ ...... 42 2.1.1 Sample gas pumps P2.2 /P2.4 Atex, 230 V AC 50/60 Hz, 115 V AC 50/60 Hz ......................... 42 2.1.2 Sample gas p umps P2.72 /P2.74 Atex, 230 V AC 50/60 Hz, 115 V AC 50/60 Hz ..................... 43 2.2 Sample gas pumps for hazardous areas (North America) ................................ ....................... 44 2.2.1 Sample gas pumps P2.2 / P2.82 AMEX and P2.4 / P2.84 AMEX, 230 V AC 50/60 Hz, 115 V AC 50/60 Hz ................................ ................................ ................................ ................................ .............. 44 2.3 Sample gas pumps for non -hazardous areas and modular design ................................ ......... 45 2.3.1 Sample gas pumps P2.3C / P2.3 / P2.83 and P2.4C / P2.4 / P2.84, 230 V AC 50/60 Hz, 115 V AC 50/60 Hz ................................ ................................ ................................ ................................ ........ 45 2.3.2 Sample gas pumps P4.3 and P4.83, 230 V AC 50/60 Hz and 115 V AC 50/60 Hz .................... 46 2.4 Accessories for P2.x and P4.x ................................ ................................ ................................ ... 47 2.5 Spare parts for motor protection switch P2.x ................................ ................................ ........... 48 2.6 Spare parts for P2.x and P4.x ................................ ................................ ................................ .... 49 2.6.1 Spare parts for sample gas pumps ................................ ................................ .......................... 49 2.7 Sample Gas Pumps P1.x ................................ ................................ ................................ ............ 50 2.7.1 Sample gas pumps P1.1, P1.1E ................................ ................................ .............................. 50 2.7.2 Sample gas pumps P1.2, P1.2 E ................................ ................................ ............................. 51 2.7.3 Sample gas pumps P1.3; P1.3 E ................................ ................................ ............................. 52 2.7.4 Accessories for P1.x ................................ ................................ ................................ ................ 53 2.7.5 Spare parts for P1.x ................................ ................................ ................................ ................ 53 3 Sample gas filters ................................ ................................ ................................ ........ 54 3.1 Sample gas filters PVDF ................................ ................................ ................................ ............ 54 3.2 Sample gas filters PTFE ................................ ................................ ................................ ............. 56 3.3 Front panel filters ................................ ................................ ................................ ....................... 58 3.4 Build -up - Filter ................................ ................................ ................................ ........................... 59 3.5 Sample gas filter stainless steel ................................ ................................ ................................ 60 3.5.1 Sample gas filter AGF - VA - 23 with viton seal ................................ ................................ ........ 60 3.5.2 Sample gas filter AGF - VA - 23 with perfluorelastomer seal ................................ .................... 61 3.5.3 Sample gas filter AGF - VA - 350 ................................ ................................ ............................. 61 3.6 Self -cleaning sample gas filters ................................ ................................ ................................ 62 3.7 Coalescing filter ................................ ................................ ................................ ......................... 63 3.8 Water stop filters* ................................ ................................ ................................ ...................... 64 3.9 Ab - / Adsorption filters ................................ ................................ ................................ .............. 65 3.9.1 Filter housing without absorber material (for different filter materials) ................................ ....... 65 3.9.2 Absorptions filters with absorber material (Filter housing with absorber material) ..................... 66 3.10 Ambient air filters ................................ ................................ ................................ ....................... 67 3.11 Heated sample gas filters ................................ ................................ ................................ .......... 68 4 Sample gas coolers ................................ ................................ ................................ ..... 70 Price List 10 /202 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 5 of 161 4.1 Thermoelectric sample gas cooler ................................ ................................ ............................ 70 4.1.1 TC -MINI ................................ ................................ ................................ ................................ .. 70 4.1.2 TC -Stand ard with 1 heat exchanger ................................ ................................ ......................... 71 4.1.3 TC -Standard with 2 heat exchangers ................................ ................................ ....................... 72 4.1.4 TC -MIDI with one gas path inside the heat exchanger ................................ ............................. 73 4.1.5 TC -MIDI with two gas paths insides the heat exchanger ................................ .......................... 74 4.1.6 TC -Double ................................ ................................ ................................ ............................... 75 4.1.7 TC -Standard OEM ................................ ................................ ................................ ................... 76 4.1.8 TC -KIT ................................ ................................ ................................ ................................ .... 80 4.2 Sample gas c oolers ................................ ................................ ................................ .................... 81 4.2.1 RC 1.1 ................................ ................................ ................................ ................................ ..... 81 4.2.2 EGK 4S ................................ ................................ ................................ ................................ ... 82 4.2.3 EGK 10 ................................ ................................ ................................ ................................ ... 83 4.2.4 EGK 2 -19 with one gas path ................................ ................................ ................................ .... 84 4.2.5 EGK 2 -19 with two gas paths ................................ ................................ ................................ ... 85 4.3 Coolers for hazardous areas ................................ ................................ ................................ ..... 86 4.3.1 TC -Standard X2; with one heat exchanger ................................ ................................ .............. 86 4.3.2 TC -Standard X2; with two heat exchangers ................................ ................................ ............. 87 4.3.3 TC -Midi X2; with one gas path inside the heat exchanger ................................ ........................ 88 4.3.4 TC -Midi X2; with two gas paths insides t he heat exchanger ................................ ..................... 89 4.3.5 TC -Double X2 ................................ ................................ ................................ ......................... 90 4.3.6 EGK 1 Ex2, for Atex zone 2 and IECEx ................................ ................................ ................... 91 4.3.7 EGK 2A Ex, for Atex Zone 1 (metric connections) ................................ ................................ .... 92 4.3.8 EGK 2A Ex, for Atex Zone 1 (imperial connections) ................................ ................................ . 93 4.4 Washout -optimised cooler types ................................ ................................ ............................... 94 4.4.1 TC -Standard+; Peltier cooler with two heat exchangers in series ................................ ............. 94 4.4.2 TC -Midi+; Peltier cooler with two heat exchangers in series ................................ ..................... 95 4.4.3 TC -Double+; Peltier cooler with two heat exchangers in series ................................ ................ 96 4.4.4 EGK 2 -19+; compressor cooler with two heat exchangers in series ................................ .......... 97 4.4.5 RC 1.2+; c ompressor cooler with two heat exchangers in series ................................ .............. 98 4.4.6 TC -KIT+ ................................ ................................ ................................ ................................ .. 99 4.5 Washoutoptimised cooler types, for hazardous areas ................................ ........................... 100 4.5.1 TC -Standard+ X2; Peltier cooler with two heat exchangers in series ................................ ...... 100 4.5.2 TC -Midi+ X2; Peltier cooler with two heat exchangers in series ................................ .............. 101 4.5.3 TC -Double+ X2 ................................ ................................ ................................ ..................... 102 4.6 Marine Cooler ................................ ................................ ................................ ........................... 103 4.6.1 CU -EMA+ ................................ ................................ ................................ .............................. 103 4.7 Accessories for sample gas cooler ................................ ................................ ......................... 104 4.7.1 Accessories for EGK 4S ................................ ................................ ................................ ........ 104 4.7.2 Accessories for EGK 2A Ex* ................................ ................................ ................................ .. 104 4.8 Water chillers / Gas scrubbers / Pre -coolers ................................ ................................ .......... 105 4.8.1 Water chillers ................................ ................................ ................................ ........................ 105 4.8.2 Sample gas scrubbers ................................ ................................ ................................ ........... 105 4.8.3 Pre -separators ................................ ................................ ................................ ...................... 106 4.8.4 Pre -coolers ................................ ................................ ................................ ............................ 107 4.8.5 Precooling and acidification ................................ ................................ ................................ ... 107 4.8.6 Dosing unit EMIDos ................................ ................................ ................................ ............... 108 4.8.7 Accessories Dosing unit ................................ ................................ ................................ ........ 108 4.9 Condensate discharge ................................ ................................ ................................ ............. 109 4.9.1 Peristaltic pumps model range CP with CE - and FM -Approval ................................ ............... 10 9 4.9.2 CP Single 1l ................................ ................................ ................................ .......................... 110 4.9.3 Peristaltic pumps model range CP with ATEX 2, IECEx and Cl.1 Div.2 approval .................... 111 4.9.4 Peristaltic pumps model range CP with ATEX 1 approval ................................ ...................... 112 4.9.5 Replacement hoses CPsingle, CPdouble ................................ ................................ ............... 113 4.9.6 Automatic condensate drains ................................ ................................ ................................ . 116 Price List 10 /202 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 6 of 161 4.9.7 Condensate vessels ................................ ................................ ................................ .............. 117 4.9.8 Connection set ................................ ................................ ................................ ...................... 118 4.10 Moisture detectors ................................ ................................ ................................ ................... 119 4.10.1 Moisture detectors ................................ ................................ ................................ ................. 119 4.10.2 Controllers ................................ ................................ ................................ ............................. 119 4.10.3 Accessories ................................ ................................ ................................ ........................... 120 5 Accessories ................................ ................................ ................................ ................ 121 5.1 Flow meters ................................ ................................ ................................ .............................. 121 5.1.1 Flow meters standard measure range air / water (without mounted flow sensor) .................... 121 5.1.2 Flow m eters standard measure range air / water (with mounted flow sensor) ......................... 121 5.1.3 Flow meters special measure range air / water (witho ut mounted flow sensor) ....................... 122 5.1.4 Flow meters special measure range air / water (with mounted flow sensor) ............................ 122 5.1.5 Controller for flow switches ................................ ................................ ................................ .... 122 5.1.6 Safety flow meters ................................ ................................ ................................ ................. 123 5.2 Valves ................................ ................................ ................................ ................................ ....... 124 5.2.1 Needle valves ................................ ................................ ................................ ........................ 124 5.2.2 Ba ll valves ................................ ................................ ................................ ............................. 124 5.2.3 Back pressure regulator ................................ ................................ ................................ ........ 124 5.3 Hose connections, fittings ................................ ................................ ................................ ....... 125 5.3.1 Straight male screw connection ................................ ................................ ............................. 125 5.3.2 Straight female screw connection ................................ ................................ .......................... 128 5.3.3 Elbow male screw connection ................................ ................................ ................................ 129 5.3.4 Elbow screw connection, hose -to-pipe ................................ ................................ ................... 130 5.3.5 Elbow female screw connection ................................ ................................ ............................. 131 5.3.6 Y-piece male screw connection ................................ ................................ ............................. 132 5.3.7 Cross -union screw connection, hose connection on all sides ................................ ................. 132 5.3.8 Bulkhead screw connection, two -sided hose connection ................................ ........................ 132 5.3.9 T-piece male screw connection ................................ ................................ ............................. 133 5.3.10 T-piece male screw connection (asymmetric) ................................ ................................ ........ 133 5.3.11 Connector piece, two -sided hose connection ................................ ................................ ......... 134 5.3.12 Connector piece, hose -to-pipe ................................ ................................ ............................... 134 5.3.13 T-piece, hose connection on all sides ................................ ................................ .................... 135 5.3.14 Sealing cap ................................ ................................ ................................ ........................... 135 5.3.15 Small parts (replacement) ................................ ................................ ................................ ...... 136 5.4 Glass connections, fittings ................................ ................................ ................................ ...... 137 5.4.1 Glass fittings with hose connection (O -ring) ................................ ................................ ........... 137 5.4.2 Glass fittings with hose connection ................................ ................................ ........................ 137 5.5 Stainless Steel fittings ................................ ................................ ................................ ............. 139 5.5.1 Straight screw -in connection ................................ ................................ ................................ .. 139 5.5.2 Straight connector ................................ ................................ ................................ ................. 140 5.5.3 Elbow screw connection ................................ ................................ ................................ ........ 140 5.5.4 Angled connector ................................ ................................ ................................ .................. 141 5.5.5 Screw -in plug ................................ ................................ ................................ ........................ 142 5.5.6 Sm all parts (replacement) ................................ ................................ ................................ ...... 142 5.6 Accessories heated sample gas line ................................ ................................ ....................... 143 6 NOx converter ................................ ................................ ................................ ............ 144 6.1 Bünox2+ ................................ ................................ ................................ ................................ ... 144 6.2 Accessories for Bünox2+ ................................ ................................ ................................ ........ 145 6.3 Accessories for Bünox (generation one) ................................ ................................ ................ 145 7 Portable probes and conditioning systems ................................ .......................... 146 7.1 Portable sample probes type Baseline ................................ ................................ ................... 146 Price List 10 /202 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 7 of 161 7.1.1 Probe and accessories ................................ ................................ ................................ .......... 146 7.1.2 Filter / filter elements ................................ ................................ ................................ ............. 146 7.1.3 Mounting accessories ................................ ................................ ................................ ............ 147 7.2 Portable sample probes ................................ ................................ ................................ ........... 148 7.2.1 Smart -Sample -Tube ................................ ................................ ................................ .............. 148 7.2. 2 Sampling probe Smartline ................................ ................................ ................................ ..... 149 7.2.3 Sampling tubes / filter elements ................................ ................................ ............................. 152 7.2.4 Mounting accessories ................................ ................................ ................................ ............ 153 7.3 Portable gas conditioning systems ................................ ................................ ......................... 154 7.3.1 PCS.base ................................ ................................ ................................ .............................. 154 7.3.2 PCS.smart ................................ ................................ ................................ ............................. 159 7.3.3 PCS.smart+ (washout -optimised version) ................................ ................................ .............. 160 7.4 SCS modular sample conditioning systems ................................ ................................ ........... 161 Price List 10 /202 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 8 of 161 General information This price list contains our standard products. If your application parameters require variations or specials we are pleased to offer application specific solutions. Furthermore, we can supply you complete sample conditioning systems. With release of this price list all previously published price lists become void. Prices are suggested retail prices, sales tax is not included. We reserve the right to adjust the prices without advance notice. Errors excepted. Please refer to our genera l terms and conditions , which you can find on our website: http://www.buehler -technologies.com No discounts are granted for orders with a value less than EUR 100, --. 12. Oktober 2022 Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 9 of 161 1 Sample gas probes 1.1 GAS 222, unheated probes 1.1.1 GAS 222.10, unheated, downstream filter, applicable for dust up to approx. 2g/m³ Part no. 4 6 2 2 2 1 0 9 9 0 0 0 0 9 9 9 9 9 9 Price Total Sample Probe Basic Unit GAS 222.10 838,00 € Flange/ Approval 0 DIN DN65 PN6 0,00 € 1 ANSI 3" - 150lbs 79,00 € Power Supply none Calibration Gas P ort 0 Without calibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + with check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + with check valve 481,00 € Part no. 4 6 2 2 2 1 0 9 9 0 0 0 0 9 9 9 9 9 9 Catalogue Price The ba sic unit works properly only with th e correspondent accessories (for example filter element). Please select th e parts and prices from th e a ttached list in chapter 1.9 . Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 10 of 161 1.1.2 GAS 222.11/30/35U, unheated, blowback for dust up to approx. 200g/m³ Part no. 4 6 2 2 2 0 9 9 0 0 0 0 Price Total Sample Probe Basic Unit 1 1 GAS 222.11 1.409,00 € 3 0 GAS 222.30 1.339,00 € 3 5 GAS 222.35U 1.406,00 € Flange/ Approval DIN DN65 PN6 0,00 € Power Supply none 0,00 € Calibration Gas Port 0 without Calibration Gas Port 0,00 € 1 6mm 184,00 € 2 6mm + with check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + with check valve 481,00 € Heated extension no 0,00 € Built -in temperature controller for heated extension no 0,00 € Back Purge with Capacitive Vessel 1) 740,00 € Support for pressurized vessel (only for GAS 222.35U) 260,00 € Heater for Capacitive Vessel 1 yes 333,00 € 9 no 0,00 € Integrated Blowback Controller 9 no 0,00 € Internal valve for Pressurized Air/Power Supply 0 manual 210,00 € 1 115 V 342,00 € 2 230 V 345,00 € 3 24V 337,00 € 9 without (if there is no blowback required) 0,00 € Pneumatic actuator for Internal Ball Valve 0 manual (not for GAS 222.35U) 0,00 € 1 Mono stable depressurised open (not for GAS 222.35U) 674,00 € 2 Mono stable depressurised closed (not for GAS 222.35U) 660,00 € 3 bistable (not for GAS 222.35U) 660,00 € 9 without (only for GAS 222.35U) 0,00 € Limit Switch for Pneumatic Actuator 1 yes (not for GAS 222.35U) 235,00 € 9 no 0,00 € Solenoid Valve for Pneumatic Actuator 3 3/2-way solenoid valve (not for GAS 222.35U) 250,00 € 5 5/2-way solenoid valve (not for GAS 222.35U) 161,00 € 9 without solenoid valve 0,00 € Part no. 4 6 2 2 2 0 9 9 0 0 0 0 Catalogue Price The ba sic unit works properly with th e correspondent accessories (for example filter element). Please select th e parts and prices from the attached list in chapter 1.9 . 1) Burnable sample gases must be p urged with inert gases. For explosive gases a blowback is not allowed! Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 11 of 161 1.1.3 GAS 222.11/30/35U, ANSI/CSA, unheated, blowback for dust up to approx. 200g/m³ Part no. 4 6 2 2 2 1 9 9 0 0 0 0 9 Price Total Sample Probe Basic Unit 1 1 GAS 222.11 ANSI/CSA 1.487,00 € 3 0 GAS 222.30 ANSI/CSA 1.411,00 € 3 5 GAS 222.35U ANSI/CSA 1.481,00 € Flange/Approval ANSI 3" - 150lbs 1) 0,00 € Power Supply none 0,00 € Calibration Gas Port 0 without Calibration Gas Port 0,00 € 1 6mm 184,00 € 2 6mm + with check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + with check valve 481,00 € Heated extension no 0,00 € Built -in temperature controller for heated extension no 0,00 € Back Purge with Capacitive Vessel 2) 740,00 € Support for pressurized vessel (only for GAS 222.35U) 260,00 € Heater for Capacitive Vessel 1 yes 333,00 € 9 no 0,00 € Integrated Blowback Controller 9 no 0,00 € Internal valve for Pressurized Air/Power Supply 0 manual 210,00 € 1 120V 60Hz 688,00 € 2 240V 60Hz 688,00 € 9 without (if there is no blowback required) 0,00 € Pneumatic actuator for Internal Ball Valve 0 manual (not for GAS 222.35U ANSI/CSA) 0,00 € 1 Mono stable depressurised open (not for GAS 222.35U ANSI/CSA) 674,00 € 2 Mono stable depressurised closed (not for GAS 222.35U ANSI/CSA) 660,00 € 9 without (only for GAS 222.35U ANSI/CSA) 0,00 € Limit Switch for Pneumatic Actuator no 0,00 € Solenoid Valve for Pneumatic Actuator 3 3/2- way solenoid valve (not for GAS 222.35U ANSI/CSA) 307,00 € 9 without solenoid valve 0,00 € Part no. 4 6 2 2 2 1 9 9 0 0 0 0 9 Catalogue Price The ba sic unit works only properly with th e correspondent accessories (for example filter element). Please select th e parts and prices from the attached list in chapter 1.9 . 1) Sample Probes with ANSI Flange have the CSA and the C -US admission. 2) Burnable sample gases must be purged with inert gases. For explosive ga ses a blowback is not allowed! Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 12 of 161 The ba sic unit works only properly with the correspondent accessories (for example filter element). Please select th e parts and prices f rom the attached list in chapter 1.9 . 1.2 GAS 222.20 DH, steam heated , downstream filter, applicable for dust up to approx. 2 g/m³ Part no. 4 6 2 2 2 2 0 9 9 0 9 0 0 9 9 9 9 9 9 Price Total Sample Probe Basic Unit GAS 222.20 DH steam heated 2.578,00 € Flange 0 DIN DN65 PN6 0,00 € 1 ANSI 3" - 150lbs 79,00 € Power Supply steam (only for GAS 222.20DH) 0,00 € Calibration Gas P ort 0 Without calibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + with check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + with check valve 481,00 € Part no. 4 6 2 2 2 2 0 9 9 0 9 0 0 9 9 9 9 9 9 Catalogue Price Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 13 of 161 1.3 GA S 222, heated gas probes 1.3.1 GAS 222.15/17/20, heated, downstream filter, applicable for dust up to approx. 2 g/m³ for safe area Part no. 4 6 2 2 2 9 9 0 9 9 9 9 9 9 Price Total Sample Probe Basic Unit 1 5 GAS 222.15 with self -regulated heater 1.341,00 € 1 7 GAS 222.17 with self -regulated heater 1.766,00 € 2 0 GAS 222.20 temp eratu re regulated by controller 2.350,00 € Flange 0 DIN DN65 PN6 0,00 € 1 ANSI 3" - 150lbs 1) 76,00 € Power Supply 1 115 V (only for GAS 222.20) 0,00 € 2 230 V (only for GAS 222.20) 0,00 € 3 115/230 V (only for GAS 222.15/17) 0,00 € Calibration Gas P ort 0 Without calibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + check valve 481,00 € Heated Extension 0 no 0,00 € 1 yes (only for GAS 222.20, price is listed in the attached file) 0,00 € Built -in tem peratur e controller for heated extension 0 no 0,00 € 1 yes (only for GAS 222.20) 545,00 € Part no. 4 6 2 2 2 9 9 0 9 9 9 9 9 9 Catalogue Price The ba sic unit works properly with the correspondent accessories (for example filter element). Please select the pa rts and p rices from the attached list in chapter 1.9 . 1) Sample Probes with ANSI Flange have the CSA and the C - US approval. Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 14 of 161 1.3.2 GAS 2 22. 21/31/35, heated, back purge, applicable for dust up to approx. 200g/m 3, for safe area Part no. 4 6 2 2 2 0 9 9 0 Price Total Sample Probe Basic Unit 2 1 GAS 222.21 3.136,00 € 3 1 GAS 222.31 2.878,00 € 3 5 GAS 222.35 2.942,00 € Flange/Approval DIN DN65 PN6 0,00 € Power Supply 1 115V 0,00 € 2 230 V 0,00 € Calibration Gas Port 0 Without calibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + check valve 481,00 € Heated extension 0 no 0,00 € 1 yes (only for GAS 222.21/31, price see attached file) 0,00 € Built -in temperature controller for heated extension 1) 0 no 0,00 € 1 yes (only for GAS 222.21/31) 1) 545,00 € Blowback with air reservoir 2) 740,00 € Heater for Capacitive Vessel 1 yes 333,00 € 9 no 0,00 € Integrated Blowback Controller 1) 1 Internal controller 1.102,00 € 9 no 0,00 € Internal valve for Pressurized Air/Power Supply 0 manual 210,00 € 1 115 V 342,00 € 2 230 V 345,00 € 3 24 V 337,00 € 9 without (if there is no blowback required) 0,00 € Pneumatic actuator for Internal Ball Valve 0 manual (not for GAS 222.35) 0,00 € 1 Mono stable depressurised open (not for GAS 222.35) 674,00 € 2 Mono stable depressurised closed (not for GAS 222.35) 660,00 € 3 bistable (not for GAS 222.35) 660,00 € 9 Without (only for GAS 222.35) 0,00 € Limit Switch for Pneumatic Actuator 1 yes (not for GAS 222.35) 235,00 € 9 no 0,00 € Solenoid Valve for Pneumatic Actuator 3 3/2-way solenoid valve (not for GAS 222.35) 250,00 € 5 5/2-way solenoid valve (not for GAS 222.35) 161,00 € 9 without solenoid valve 0,00 € Part no. 4 6 2 2 2 0 9 9 0 Catalogue Price 1) The electronic s can either be equipped with temperature controller for heated extension or blowback control 2) Burnable sample gases must be purged with inert ga ses. For explosive gases a blowback is not allowed! The ba sic unit works properly with th e correspondent accessories (for example filter element). Please select the parts a nd prices from the attached list in chapter 1.9 . Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 15 of 161 1.3.3 GAS 222. 21/31/35, ANSI/CSA, heated, back purge applicable for dust up to approx. 200g/m 3, for safe area Part no. 4 6 2 2 2 1 9 9 0 9 Price Total Sample Probe Basic Unit 2 1 GAS 222.21 ANSI/CSA 3.207,00 € 3 1 GAS 222.31 ANSI/CSA 2.952,00 € 3 5 GAS 222.35 ANSI/CSA 3.018,00 € Flange/Approval ANSI 3" - 150lbs 1) 0,00 € Power Supply 1 115V 0,00 € 2 230 V 0,00 € Calibration Gas Port 0 Without calibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + check valve 481,00 € Heated extension 0 no 0,00 € 1 yes (only for GAS 222.21/31) 0,00 € Built -in temperature controller for heated extension 0 No 0,00 € 1 yes (only for GAS 222.21/31) 2) 545,00 € Back Purge with Capacitive Vessel 3) 740,00 € Heater for Capacitive Vessel 1 yes 333,00 € 9 no 0,00 € Integrated Blowback Controller 2) 1 Internal controller 1.102,00 € 9 no 0,00 € Internal valve for Pressurized Air/Power Supply 0 manual 210,00 € 1 120V 60Hz 688,00 € 2 240V 60Hz 688,00 € 9 without (if there is no blowback required) 0,00 € Pneumatic actuator for Internal Ball Valve 0 manual (not for GAS 222.35 ANSI/CSA) 0,00 € 1 Mono stable depressurised open (not for GAS 222.35 ANSI/CSA) 674,00 € 2 Mono stable depressurised closed (not for GAS 222.35 ANSI/CSA) 660,00 € 9 without (only for GAS 222.35 ANSI/CSA) 0,00 € Limit Switch for Pneumatic Actuator no 0,00 € Solenoid Valve for Pneumatic Actuator 3 3/2- way solenoid valve (not for GAS 222.35 ANSI/CSA) 307,00 € 9 without solenoid valve 0,00 € Part no. 4 6 2 2 2 1 9 9 0 9 Catalogue Price 1) Sample Probes with ANSI Flange have the CSA and the C -US admission. 2) The electronic s can either be equipped with temperature controller for heated extension or blowback control . 3) Burnable sample gases must be purged with inert ga ses. For explosive gases a blowback is not allowed! The ba sic unit works only properly with the correspond ent accessories (for example filter elem ent). Please select the pa rts and p rices from the attached list in chapter 1.9 . Due to the revision of the approval, not all versions are currently available. Please ask for this. Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 16 of 161 The hazardous area can be differentia ted inside and outside. The ba sic unit works only properly with th e correspondent accessories (for example filter element). Please select th e parts and prices from the attached list in chapter 1.9 . 1.4 GAS 222, unheated sample probe for hazardous area 1.4.1 GAS 222.10, unheated, downstream filter, applicable for dust up to approx. 2g/m³, for hazardous area Installation in hazardous area sampling f rom hazardous area Part no. 4 6 2 2 2 1 0 0 0 0 0 9 9 9 9 9 9 Price Total Sample Probe Basic Unit GAS 222.10 838,00 € Flange/Approval DIN DN65 PN6 0,00 € Hazardous area Outside and Inside 1 1 zone 1 0,00 € 2 2 zone 2 0,00 € 4 4 zone 21 0,00 € 5 5 zone 22 0,00 € 9 9 no zone 0,00 € Temperature Classes 2 T2 0,00 € 3 T3 0,00 € 4 T4 0,00 € 6 T6 0,00 € Power Supply none 0,00 € Calibration Gas P ort 0 Without calibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + check valve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + check valve 481,00 € Part no. 4 6 2 2 2 1 0 0 0 0 0 9 9 9 9 9 9 Catalogue Price The sales of the represented version is only permitted outside the EU. The corresponding certification for GAS 222.11 / 30 /35U is available. Please request for these Price List 10 /20 2 2 Gas Analysis Bühler Technologi es GmbH Phone: +49(0)2102/49890 Email: analyse@ buehler -technologies.com 01. 10.20 22 Harkortstr. 29 Fax: +49(0)2102/498920 http://www.buehler -technologies.com D-40880 Ratingen PEGA 10202 2A0 page 17 of 161 1.4.2 GAS 222.11/30/35U, unheated, purge back, applicable for dust up to approx. 200g/m 3, for hazardous area Installation in hazardous area samplin g from hazardous area Part no. 4 6 2 2 2 0 0 0 0 9 Price Total Sample Probe Basic Unit 1 1 GAS 222.11 1.409,00 € 3 0 GAS 222.30 1.339,00 € 3 5 GAS 222.35U 1.406,00 € Flange /Appr oval DIN DN65 PN6 0,00 € Hazard ous area Outside and In side 1) 1 1 zone 1 0,00 € 2 2 zone 2 0,00 € 4 4 zone 21 0,00 € 5 5 zone 22 0,00 € 9 9 no zone 0,00 € Ex Temper ature Cl asse s 2 T2 0,00 € 3 T3 0,00 € 4 T4 0,00 € 6 T6 0,00 € Power Supply none 0,00 € Calibr ation Gas P ort 0 Without cal ibration gas port 0,00 € 1 6mm 184,00 € 2 6mm + check val ve 481,00 € 3 1/4'' 184,00 € 4 1/4'' + check val ve 481,00 € Back Purge with Capacitive Vessel 2) 740,00 € Support of pre ssurised vessel (only for GAS 222.35U) 260,00 € Heater for Cap acitive Vessel 1 yes (only for Zone 2, not for T6) 428,00 € 9 no 0,00 € Internal v alve for Pres surized Air/P ower Supply 0 manual 210,00 € 1 115V (not for T6) 688,00 € 2 230V (not for T6) 688,00 € 3 24V (not for T 6) 688,00 € 9 without (if there is no blowback required) 0,00 € Pneumatic actuator for I nternal Ball Valve 0 Manual (not for GAS 222.35U) 0,00 € 1 Mono stable depressur ised open (not for GAS 222.35U) 674,00 € 2 Mono stable depressur ised clo sed (not for GAS 222.35U) 660,00 € 9 without (not for GAS 222.35U) 0,00 € Limit Switch for Pneu matic Actuator 1 yes (not for Zo ne 21, n ot for GAS 222.35U) 550,00 € 9 no 0,00 €