MCA-100-syn-3-Portable-bullettin-1,

MCA 100 Syn 3 Portable MULTICOMPONENT ANALYZER FOR SynGAS The MCA 100 SYN series of gas analyzers by ETG it ’s the ideal solution for biogas measurement and industrial c ombustion applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG MCA 100 non -dispersive infrared (NDIR) gas analyzers measure multiple gases in an inst rument with a single optical path platform. Single -gas analyzers are inadequate when using methane as a biofuel because the gas often contains large amounts of CO as a contaminant. ETG analyzers have the ability to measure CO2, CO, and O2 in addition to methane and therefore provide the optimal combination of gases for combustion optimization. The enhanced optics and electronics of our NDIR analyzers have virtually eliminated zero drift after the initial warm up period. The temperature and pressure compe nsation eliminates the major causes of span drift in many NDIR instruments. • Analysis CO 2, CH 4, CO, O2, H 2, • NDIR technology for CO 2 CO and CH 4 • TCD for H 2 • Arm Processor • Touch Screen monitor • Ethernet, Wi -fi and USB Remo ting • N2 and Heat value calculate by proprietary algorithm ( standard ) Low cost ownership • Portable version with battery pack • Modbus, Profibus, Ethernet ( optional ) • Data downloadable on USB Pen Drive • Cross sensitivity compensation • Sample conditioning system ( optional ) • Additional CnHm measuring by NDIR detector ( optional ) T90 & T 10 <20 seconds +/- 0.5 abs or +/ - 3.0% rel +/- 0.5% abs or +/ - 3.0% rel 0-10 % 0-20% 0 - 50% 0-100 % 0,1 % Hydrogen Thermoconduc ibility < 40 seconds from ambient to 0.15 O2 +/- 0,1% abs or +/ - 1.5% rel +/- 0,1% abs or +/ - 3.0% rel 1.01 -25.00% 0,01% Oxygen Electro - chemical sensor T90 & T 10 <10 seconds +/-0,7% +/- 0,1% abs or +/ - 0.8% rel +/- 0,8 F.S. +/- 0,3% abs or +/ - 3.0% rel +/- 5% rel 0-50% 0.00 -16.00% 0.01 -20.00% (up to 40%) 0,01% 0,01% Carbon Dioxide Carbon Monoxide NDIR ( Non - Dispersive Infrared ) T90 & T 10 <10 seconds +/- 0,8% +/- 1% F.S. +/- 2% rel +/- 1% rel +/- 5% rel 0-100% 201 ppm -40% 40 -80% 80 -100% 0,01% Methane NDIR ( Non - Dispersive Infrared ) Time Precision Accuracy Range Resoluti on Gas Measurement Method IP67(1 meter submersion for 30 minutes) • Def Stan 81 -41/STANAG 4280 Case Protection USB port ( standard ) Communications -300 to 3.000 m ( -1.000 to 10.000 ft ) Operating Altitude To 95% RH ( Non -condensing) Operating Humidity 0° to 70 ° C ( 32 ° to 158 ° F) Operating Temperature 30 seconds ready, 3 minutes useable, 30 minutes to full perfo rmance Warm -up Time 1 second Data Refresh Rate Response times are specified at a sample flow rate of a 1 liter per minute through the MCA 100 sample cell Response Time MCA 100 SYN MULTICOMPONENT ANALYZER FOR SYNGAS SPECIFICATIONS Other Version of gas Analyzers • Wall mounting Biogas anal yzer version model 6500 • 19” Rack Mounting Biogas analyzer model MCA 100 Bio • Multisampling system for Biogas analysis ETG RISORSE E TECNOLOGIA Via P. Carpignano 23 14026 Montiglio M.to (AT) ITALY Tel. +39 0141 99.4905 Fax 99.49.71 sales@etgrisorse.com www.analisi -biogas.com www.etgr isorse.com 7.5 kg Weight 50 x 28 x 40 cm Mechanical dimensions Rapid fittings 6.0 OD 4.0 ID Pneumatic connection from 100 to 240 Vac 47 -63 Hz External Electrical supply Zero & span user selecta ble. Calibration Touch Screen 5.7 ” Resistive type Monitor 12 – 24 Vcc with Internal Charger and light charge indicator Battery MCA 100 SYN Portable MULTICOMPONENT ANALYZER FOR SYNGAS Bargraph and digital value Trend and digital value USER INTERFACE OVERVIEW All the ETG MCA 100 and 6500 series for Syngas have Remote Support and Remote Access ? File transfer ? Data monitoring by your PC , tablet and smartphone ? Software update