Linacure 60 Spec Sheet.pdf

Linacure ® 60 Technical Specifications Wear resistant, uncured rubber for tough slurry applications Linacure ® 60 rubber is a silica-reinforced natural rubber uniquely designed to provide high resilience with good cut, tear and abrasion resistance. The development of Linacure ® 60 rubber specifically set out to produce a rubber that retains the natural strength and nerve of latex, together with the \ toughness needed for handling coarse materials. Linacure ® 60 rubber provides the performance benefits of Linard ® 60 rubber in applications where hot bonding is the preferred method of installation. Linacure ® 60 provides excellent abrasion resistance in course slurry applications. It’s inherent flexibility creates a rubber that has good anti-sticking and anti-build up properties making it an ideal solution for many hard to solve problems. Design Features • Excellent anti-sticking and anti-build up properties • Excellent resistance to cutting by sharp-edged products • Good wet abrasion resistance Applications • Hose linings • Pipe lining • Abrasive environments where sticking and/or build up are major issues Size/Availability Standard sheet dimensions will vary within each Weir global region. Not available in some global locations. Please contact your local Weir Minerals office to confirm. • Standard thickness range: 3.0mm to 12.0mm (approx. 1?8” to 1?2”) Minerals Bonding Systems and Installation Please consult your local Weir Minerals representative for advice on the most suitable bonding method. Storage The shelf life of the Linacure ® 60 compound is dependant upon the temperature at which the compound is stored. 6 months at or below 40 °C / 104 °F. Do not store under direct heat or sunlight. Typical Physical Properties PROPERTY TEST STANDARD LINACURE ® 60 Polymer Type Natural Rubber Hardness (IRHD) ISO 48 - 2010 60 Modulus @ 500% (MPa) ISO 37 – 2011 9.5 Tensile Strength (MPa) ISO 37 – 2011 23 (3335 psi) Elongation at Break (%) ISO 37 – 2011 680% Tear Strength (N/mm) ASTM D624-00 - 2012 103 (587 lbsf/in) Specific Gravity ISO 2781 - 2008 1. 1 Resilience (%) BS 903. Part A8 1990 70% Operating Temperatures (continuous use) -40°C to +75°C / -40°F to +167°F Weir Minerals linatex@mail.weir www.minerals.weir Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX and LINACURE are trademarks and/or registered trademarks of Linatex Ltd. WMD0120/052017