flyer_sdl_2101_eng_feb_2021_ps

100% Made & Designed in Italy

SMART
DATALOGGERS
WITH REMOTE
MEASUREMENT,
TELEMETRY FUNCTIONS,
CLOUD SUPPORT





w w w . s e n e c a . i t
 SMART DATALOGGERS - WITH REMOTE MEASUREMENT, TELEMETRY FUNC
OVERVIEW
Advanced data loggers MYALARM SEAL, Z-GPRS3, Z-LOGGER3, Z-LTE represent a solution that can respond to the increasing needs for data acquisition
, real-time analysis and integration with IT systems in plant automation and monitoring, in compliance with the new productivity and communication
models of Industry 4.0 and Internet of Things. Designed to perform remote alarm functions, remote metering and datalogging, these devices are available
with built-in UPS, built-in I/O channels, programming and visualization software dedicated, serial and Ethernet communication support, MQTT protocol.
They also perform 2G/3G+/4G modems with GNSS/GPS/GLONASS receiver. Optionally the data loggers can be combined with Cloud BOX, an IoT /
Cloud solution proposed by SENECA that allows you to centralize data, manage remote connections, develope customizable multi-user supervision
pages.
MODELS MYALARM SEAL Z-LOGGER3 Z-GPRS3 Z-LTE


Power Supply Vdc, built-in UPS Vac/dc, built-in UPS Vac/dc, built-in UPS Vac/dc, built-in UPS

Modem 2G - 2G 4G
World Wide
8MB Flash + Micro SD 8MB Flash + Micro SD 8MB Flash + Micro SD 8MB Flash + Micro SD
Memory
max 32 GB max 32 GB max 32 GB max 32 GB

GPS / GNSS / GLONASS þ(*) - - þ
Hardware 4DI, 2AI, (2DO option) 4DI, 2AI, 2DO 4DI, 2AI, 2DO 4DI, 2AI, 2DO
Built-in / Expandable I/O
Not expandable ModBUS expandable ModBUS expandable ModBUS expandable
#1 Ethernet 10/100 #1 Ethernet 10/100 #1 Ethernet 10/100
#1 RS232/RS485 #1 RS232/RS485 #1 RS232/RS485
Communication Interfaces #1 Micro USB
#1 RS485 #1 RS485 #1 RS485
#1 Micro USB #1 Micro USB #1 Micro USB
Built-in NTC sensor þ - - -

SIM, public IP, APN, DynDNS þ(**) þ þ þ

Synchronous /
Asynchronous / þ þ þ þ
Triggered datalogging
Alarm & DataManagement Redundant log data þ þ þ þ
SMS / APP / Sending SMS / APP / Sending SMS / APP / Sending
Email / Alarm files via ftp / DTMF / Sending files via ftp files via ftp / DTMF / files via ftp / DTMF /
vocal alarms vocal alarms vocal alarms
Vocal alarms /
-
DTMF commands þ þ þ
Standard protocols: Ftp,
Smtp, http, ModBUS RTU, þ(***) þ þ þ
ModBUS TCP ETHERNET
IoT protocols (http post,
MQTT), Cloud BOX support þ þ þ þ
Transparent gateway
Communication / IoT -
Modbus RTU?TCP/IP þ þ þ

(*) Available in GPS versions - (**) DynDNS not included - (***) ModBUS RTU / TCP not included
CTIONS, CLOUD SUPPORT
PROGRAMMING
SENECA’s advanced dataloggers ensures a flexible programming allowed by dedicated software designed by SENECA for the development
of the control logics (SEAL). These modules are supplemented by an embedded Webserver, an App for SMS commands management
, an import and data visualization Tool (Log Factory). Besides, the ‘Cloud BOX’ HMI allows real-time telemetry, RTU commands
sending, log files analysis, events and alarms log archiving through customizable web pages by widget. SENECA offers powerful security
integration with third-party Scada systems, Cloud, database and web platforms already available in plants.
SEAL
SYSTEM CONFIGURATION AND LOGIC
MATHEMATICAL FUNCTIONS
CLOUD BOX
REMOTE CONNECTIONS MANAGEMENT, MICRO
SCADA, DATALOGGER
WEB SERVER
PARAMETERS MONITORING
& SETTING
LOG FACTORY
HISTORICAL FILES STORAGE
AND VISUALIZATION
SENECA SMS
ANDROID / IOS APP FOR SENDING
AND CUSTOMIZING SMS
THIRD PARTY SYSTEMS
THIRD-PARTY SCADA SYSTEMS, CLOUD,
DATABASE AND WEB PLATFORMS

MYALARM SEAL Z-LOGGER3 Z-GPRS3 Z-LTE
SEAL x x x X
CLOUD BOX (software appliance) x x x X
WEB SERVER - x x x
LOG FACTORY x x x x
SENECA SMS (mobile application) x - x x
SEAL, SENECA ADVANCED LANGUAGE
VARIABLES SEAL (SENECA Advanced Language) is a software
designed for advanced management of automation
and remote communication projects. SEAL allows
you to intuitively manage variables, commands, automations
, alarms, thresholds, reporting, network of
communication with the possibility of configuration
FUNCTIONS
and remote update via SIM or Ethernet.
Key features managed by SEAL include the control of CONTROLS
alarms and events associated with the channels I/O,
operations on bits, comparators, triggers and timings.
SEAL offers the possibility to set function blocks,
SeAL control blocks on the threshold and to manage in a
global way the ModBUS variables of the devices to be
Seneca Advanced Language programmed. EVENTS


ACTIONS
 CLOUD BOX - INDUSTRIAL IOT BOX WITH MICRO SCADA FUNCTIONS
WHAT IS
CLOUD BOX?
SMART
DATALOGGER

Cloud - IoT solution for data
centralization, remote con- SUPPORTEDDEVICES WEBAPPLICATION/ HMI
nections management, mul- Built-in
system up
IOT to 5.000 tag Virtual
ti-user custom supervision Machine
up to
GATEWAYS 10.000 tag
pages editing. ROUTERS

HIGHLIGHTS
HARDWARE VIRTUAL MACHINE SUPERVISION TAG MANAGEMENT
Compact fanless Server PC VMware (ESXi, Fusion, Workstation) builin Editing Web pages with built-in Threshold management of up to
dashboards, synoptics and widgets for version with third-party servers 10,000 tags (virtual machine) or
field device supervision 5,000 tags (physical server)



DATA STORAGE HISTORICAL DATA/ ALARMS SENDING COMMANDS EXPORT AND DATA
Centralized data storage and alarms Visualization of historical data Sending commands to connected RECOVERY
from connected devices time; series, events, alarms on web devices bypassing any SIM blocks Backup, automatic data recovery
max data retention up to 10 years; pages and firewall (compatibility with any system and export in csv format
min sampling time 1’ other SIM data/M2M)

CSV

HMI / SCADA FUNCTIONS TECHNICAL DATA
Operating temperature 0..40°C
Dimension (lxhxp) 185x48x165 mm
Conformity CE, FCC, RoHS, ErP Ready
Cloud BOX provides several widgets (input status, chart, bars etc), i.e. Enclosure Compact / fanless
element that represent the status of connected devices. From these
Mounting Wall mount or DIN rail
widgets are achievable responsive web pages (PC, tablet, smartphone)
dashboard type (eg. historical data, commands, events management, Processor Intel Celeron J1900 2.0 GHz Quad-Core
trend) or supervision interface. SSD 64GB mSATA
LAN controller Intel 211 AT Gigabit LAN
HISTORICAL DATA / LOG
Interfaces #4 USB ports, #2 RJ45 ports
Monitoring tools Dashboards, synoptics, widgets
Real-time visualization Yes
Log, alarms, events Yes
Analysis of historical plant files
Sampling time Min 1'
GRAPHIC VISUALIZATION
Data export .csv
Data storage tme Max 10 years
Max 5.000 (10.000 in Virtual Machine
Global tags
version)
Quick display of simultaneous graphs Protocols http, https, Ftp
 SMART DATALOGGER
APPLICATION EXAMPLES
DATA ACQUISITION AND RE-TRANSMISSION SIMULTANEOUS MASTER / SLAVE OPERATION
Z-TWS4

Z-LOGGER3
Z-LOGGER3
Invio allarmi
PLC
Modbus TCP-IP

Modbus RTU
Modbus
Master
I/O
Modbus
Slave

I/O slave I/O slave
PLC REMOTE MANAGEMENT POWER MEASUREMENT, CONTROL AND SUPERVISION
36 35 34 33 32 31 30 29 28 26 25 22 21 20 19


S203RC-D



OK
ESC
MENÙ
E-MAIL E-MAIL
10 11 12 13 14 15 16 17 18
S203TA-D
Modbus RTU
Modbus RTU
FTP FTP
PLC (Slave) Modbus TCP-IP INVERTER

Z-GPRS3 SMS Z-GPRS3 SMS

energy meter
CLOUD CLOUD
MQTT ARCHITECTURE DATALOGGING AND DATA RE-TRANSMISSION
Z-LTE Modbus
TCP-IP
publisher
publisher
E-MAIL Z-LTE
I/O slave
MYALARM
SEAL
publisher Broker FTP
MQTT Modbus
RTU
I/O slave
publisher
publisher SMS
PLC
publisher
Modbus
Z-LTE RTU CLOUD
IOT REMOTE MONITORING PUMPS CONTROL REMOTE MONITORING
MYALARM CloudBOX
SEAL


CloudBOX Z-LTE
Max LEVEL

Z-GPRS3 Z-LTE Min LEVEL
Start/Stop pumps
Z-LTE
 SMART DATALOGGER
MYALARM SEAL Z-LOGGER3 Z-GPRS3 Z-LTE

Datalogger with monitoring functions, Datalogger with built-in I/O, alarm GSM/GPRS Datalogger with built-in 4G / LTE WW Datalogger with built-in
programmable control logic and management functions and Cloud I/O, remote control functions, voice I/O, remote control functions, voice
Cloud support support commands and Cloud support commands and Cloud Support
GENERAL DATA
Power supply 6..15 Vdc 11..40 Vdc/ 19..28 Vac 11..40 Vdc/ 19..28 Vac 19..40 Vdc/ 19..28 Vac
Power transducers No Yes Yes Yes
Built-in UPS / Rechargeable Backup battery LiOn 3.7 V - 1,000 mAh Yes (max autonomy 60 minutes) Yes (max autonomy 60 minutes) Yes (max autonomy 60 minutes)
battery
Connections Spring clamps 3.5 mm pitch 3-way screw terminal blocks (5 mm pitch 3-way screw terminal blocks (5 mm pitch 3-way screw terminal blocks (5 mm pitch
for cable up to 2.5 mm2) for cable up to 2.5 mm 2) for cable up to 2.5 mm2)
Vocal alarms and DTMF Yes No Yes Yes
commands
Isolation - 1.500 Vac 1.500 Vac 1.500 Vac
Protection degree IP20 IP20 IP20 IP20
SIM Push-push SIM slot for mini SIM 15x25 - Push-push SIM slot for mini SIM 15x25 Push-push SIM slot for mini SIM 15x25
mm mm mm
Display LCD 128x32 punti con area visibile 39x8,6 - - -
mm
Operating temperature -20..+55°C (0..45°C recommended) -10..+50°C -10..+50°C -10..+50°C
Built-in temperature sensor Termistore NTC - - -
Weight 150 g 250 g 280 g 280 g
Dimension (lxhxd) 80x105x30 mm 100 x 112 x 35 mm 100 x 112 x 35 mm 100 x 112 x 35 mm
Mounting DIN rail or wall mount 35 mm DIN rail - IEC EN60715 35 mm DIN rail - IEC EN60715 35 mm DIN rail - IEC EN60715
Case Polycarbonate ABS PBT, black PBT, black PBT, black
I/O CHANNELS
Digital Inputs Nr.4 channels Reed, contact, PNP, Pulscap Nr.4 PNP, NPN channels (counters @32bit Nr.4 PNP, NPN channels (counters @32bit Nr.4 channels PNP, NPN, max 30 Hz (4
(photodiode) 30 Hz up to 30 Hz) up to 30 Hz) counters/totalizers @32bit)
Analog Inputs Nr.2 channels, voltage range (0..30 Vdc); Nr.2 channels, range 0..20 mA, 0..30 V, Nr.2 channels, range 0..20 mA, 0..30 V, Nr.2 channels, range 0..20 mA, 0..30 V,
current (0..20 mA); accuracy 0,1% f.s. 16 bit 16 bit 16 bit
Digital Outputs See options and order codes Nr.2 relay channels SPDT max 2 A 250 Vac Nr.2 relay channels SPDT max 2 A 250 Vac Nr.2 relay channels SPDT max 2 A 250 Vac
ModBUS I/O expandability No Yes Yes Yes
COMMUNICATION
Communication ports Nr.1 Micro USB B Host Nr.1 Ethernet 10/100 M (RJ45), Nr.1 Nr.1 Ethernet 10/100 M (RJ45), Nr.1 Nr.1 Ethernet 10/100 M (RJ45), Nr.1
RS232/RS485 switchable (terminal), Nr.1 RS232/RS485 switchable (termi nal), Nr.1 RS232/RS485 switchable (terminal), Nr.1
RS485 ModBUS, Nr.1 Micro USB B Host RS485 ModBUS, Nr.1 Micro USB B Host RS485 ModBUS, Nr.1 Micro USB B Host
local programming local programming local programming
Protocols http post, MQTT Ftp, Smtp, http, ModBUS TCP, ModBUS Ftp, Smtp, http, ModBUS TCP, ModBUS FTP client,SMTP client, http rest (SSL),
RTU, HTTP post, MQTT RTU, HTTP post, MQTT, Https, SMTP with MQTT (SSL), ModBUS TCP Client/Server,
SSL/TLS ModBUS RTU Master / Slave, Https, SMTP
and MQTT with SSL/TLS
Modem / GPS / Radio GSM/GPRS Quad band (850 / 900 / 1800 - 2G - GSM/GPRS Quad Band 850/900/ · Multiband M2M/IoT, 4G / LTE World Wide
/ 1900 MHz) 1800/1900 MHz · LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/
B18/ B19/B20/B25/B26/B28
· LTE-TDD: B38/B39/B40/ B41
· WCDMA: B1/B2/B4/B5/B6/B8/B19
· GSM: B2/B3/B5/B
· GPS / GLONASS / BeiDou (compass) / Galileo
/ QZSS
Transparent Gateway - Yes Yes Yes
PROCESSING, MEMORY
Flash (serial) 8 MB 8 MB 8 MB 8 MB
Expandable memory Micro SD included, Micro SD push-push Micro SD card included (up to 4 GB) Micro SD card included (up to 4 GB) MicroSD card included (up to 4 GB)
slot for SD and SDHC card up to 32 GB expandable up to 32 GB (dedicated slot) expandable up to 32 GB (dedicated slot) expandable up to 32 GB (Micro SD or
MicroSDHC)
Datalogger Measurements, alarms, events, logging on Measurements, alarms, events, logging on Measurements, alarms, events, logging on Measurements, alarms, events, logging on
Micro SD card and Flash Memory Micro SD card and Flash Memory Micro SD card and Flash Memory Micro SD card and Flash Memory
Synchronous Datalogger Minimum sampling time 1 minute Minimum sampling time 1 minute Minimum sampling time 1 minute Minimum sampling time 1 minute
Asynchronous Datalogger Up to 8 trigger events with max. input Up to 8 trigger events with max. input Up to 8 trigger events with max. input Up to 8 trigger events with max. input
freq. 1 Hz freq. 1 Hz freq. 1 Hz freq. 1 Hz
PROGRAMMING AND MAIN FUNCTIONS
Programming environment SEAL (SENECA Advanced Language) SEAL (SENECA Advanced Language) SEAL (SENECA Advanced Language) SEAL (SENECA Advanced Language)
Max. number of function
32 32 32 32
blocks (SEAL)
No. max variables per device 91 100 100 100
Yes, over Ethernet, Private APN SIM, Public Yes embedded or on SD Card, Ethernet,
Web Server - Yes, on Ethernet
IP SIM Private APN SIM, Public IP SIM, DDNS
Mobile app SENECA SMS SENECA SMS SENECA SMS SENECA SMS
Character encoding UTF8/UNICODE support UTF8/UNICODE support UTF8/UNICODE support UTF8/UNICODE support
Firmware update SD Card, porta USB, Ftp esterno Ftp / Web Server Ftp / Web Server Ftp / Web Server
IoT / Cloud Support http post, MQTT, CloudBOX compatibility http post, MQTT, CloudBOX compatibility http post, MQTT, CloudBOX compatibility http post, MQTT, CloudBOX compatibility
Advanced math functions Yes Yes Yes Yes
STANDARD
Norms ETSI EN 301489-7, EN 301511, EN 301 EN 61000-6-4, EN 64000-6-2, EN EN 301511, EN 301489-1/7, EN 60950 EN 61000-6-4, EN 61000-6-2, EN
489-1 IEC / EN 60950 61010-1 301511, EN 301489-1, EN 301489-7,
EN 60950
ORDER CODES
https://www.seneca.it/en/linee-di-prodotto/comunicazione-industrialeetelecontrollo
/apparati-gsmgprs-teleallarmedatalogger/ 20C0067_DL2102_EN – February 2021

Headquarters:
Via Austria, 26 - 35127 Padova (I)
T. +39 049 8705.359 - F. +39 049 8706.287
info@seneca.it - www.seneca.it
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, SENECA assumes no liability resulting
from errors or omissions, or from the use of the information contained herein. Reproduction is forbidden unless authorized.