spécifications techniques du caoutchouc linatex premium

Spécifications techniques du caoutchouc Linatex® Premium

Minerals

• Bonding Systems and Installation
  Specifically designed two-part bonding systems are available from Weir Minerals. Please consult your local representative for advice on the most suitable bonding method.

Proven superior abrasion resistance

Linatex® premium rubber is a 95% natural rubber that exhibits outstanding resilience, strength and resistance to cutting, tearing, and abrasion. The rubber of choice for over 90 years in the handling of aggressive materials, Linatex® premium rubber is still the premium wear resistant rubber for sliding or wet abrasion service. It is our unique liquid phase compounding process that gives Linatex® premium rubber its extraordinary physical properties and outstanding performance. Our process, unlike other processes, causes minimal mechanical disturbance to the molecular structure of the finished rubber, resulting in significant cost benefits to the user. With Linatex® premium rubber, there is no equivalent when it comes to wet abrasion.

• Proven superior performance in fine slurry abrasion
• Excellent resistance to cutting and tearing
• High resilience and low modulus
• Resistance to a wide range of chemicals

The uses of Linatex® premium rubber are almost unlimited:

• Pipe lining
• Pumps
• Chute Lining
• Hoses
• Tank Linings
• Valve Liners
• Hydrocyclones
• Belting

• Polymer Type: Natural Rubber
• Hardness (IRHD): 38 (ISO 48 - 2010)
• Modulus @ 500% (MPa): 2.0 (ISO 37 – 2011)
• Tensile Strength (MPa): 25 (3618 psi) (ISO 37 – 2011)
• Elongation at Break (%): 830% (ISO 37 – 2011)
• Tear Strength (N/mm): 44 (250 lbsf/in) (ASTM D624-00 - 2012)
• Specific Gravity: 0.96 (ISO 2781 - 2008)
• Resilience (%): 83% (BS 903. Part A8 1990)
• Operating Temperatures (continuous use): -40 °C to +70 °C / -40 °F to +158 °F
• Colour: Red

• Standard sheet size: 9.25m x 1.23m nominal (approx. 30ft x 4ft)
• Standard thickness range: 1.5mm to 30.0mm (approx. 1/16” to 1 3/16”)

Copyright © 2019, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0118/201510