fiche technique du tuyau de boue à paroi dure linatex 808
spécifications techniques du tuyau de boue linatex 808 pour les applications minières
Contenu du document
Linatex® Hard Wall Slurry Hose (808)
Technical Specifications
Applications
- Pumping and transfer of abrasive slurries under pressure or vacuum for:
- Mineral processing plants
- High pressure tailings lines
- Sand and gravel transfer
- Lime transfer
- Oil sands
Design Features
- Superior wear performance in fine slurry abrasion
- Robust and versatile
- Available with Linatex®, Linacure® or Linard® abrasion resistant internal wear liners
- Designed and manufactured to customer requirements
- Inbuilt end connections
- High tensile reinforcement cord with a steel wire helix
Properties
- Nominal bores from 50mm (2”) to 1000mm (40”)*
- Lengths up to 15m (50ft)**
- Operating temperature -35°C to +75°C (-31°F to +167°F)
- Suitable for discharge and vacuum duties
- Minimum bend radius of 8-10 times the internal diameter
- * Custom internal diameters are also available.
- ** Product specifications are subject to regional variations.
Wear liner composition is critical to the performance of your Linatex® rubber hose. With over 90 years of rubber manufacturing experience, we have the expertise to select the best compound for your specified application.
Our superior Linatex® rubber compounds provide your application with outstanding wear resistance and extended wear life. This is designed to achieve the lowest total cost of ownership for all our hoses.
For more information, please refer to our range of Linatex® rubber technical specification sheets.
Typical Physical Properties
| Nominal Bore | Wear Liner Thickness | Working Pressure | Bend Radius |
|---|---|---|---|
| 50mm (2in) | 6mm (¼) | 400kPa | 1.31ft |
| 75mm (3in) | 6mm (¼) | 600kPa | 1.97ft |
| 100mm (4in) | 6mm (¼) | 800kPa | 2.62ft |
| 125mm (5in) | 6mm (¼) | 1000kPa | 3.28ft |
| 150mm (6in) | 6mm (¼) | 1200kPa | 3.94ft |
| 200mm (8in) | 6mm (¼) | 1600kPa | 5.25ft |
| 250mm (10in) | 10mm (3?8) | 5000kPa | 6.56ft |
| 300mm (12in) | 10mm (3?8) | 5000kPa | 7.87ft |
| 350mm (14in) | 10mm (3?8) | 2800kPa | 9.19ft |
| 400mm (16in) | 12mm (½) | 3200kPa | 10.50ft |
| 450mm (18in) | 12mm (½) | 4050kPa | 13.29ft |
| 500mm (20in) | 12mm (½) | 5000kPa | 16.40ft |
| 600mm (24in) | 12mm (½) | 7200kPa | 23.62ft |
Weir Minerals
Copyright © 2019, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX, LINARD, LINACURE and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0145/201510
info.minerals@mail.weir
www.minerals.weir
