ENG - Linatex 888 Adaptable Hose Spec Sheet.pdf

Linatex ® Adaptable Slurry Hose (888) Technical Specifications Versatility without compromise The Linatex ® 888 adaptable slurry hose is a hybrid design. It’s inbuilt flange allows ease of assembly, while it’s versatile cut-to-length feature allows the hose to be trimmed in-situ on site. The hose internal wear liner includes our Linatex ® premium rubber for performance and reliability in fine slurry abrasion providing a total hose solution that supports flexibility with infield fit-up. The hose is available in standard dimensions although may be customised \ to support various lengths or internal wear liner options. Design Features • Adaptable open ended design for installation flexibility • Inbuilt flange on one side only, open ended the other for trimming to length in-situ • Swivel slotted flange design supports multiple drill patterns • Aluminium couplings are interchangeable with the Linatex ® 801 hose range • Linatex ® premium rubber internal wear liner Properties • Nominal bores from 100mm (4”) to 300mm (12”)* • Operating pressures up to 1000 kPa** • Operating temperature -35°C to +75°C (-31°F to +167°F) • Locally available in standard lengths • Minimum bend radius of 8D • Safety Factor: 3:1 Minerals Applications Pumping and transfer of abrasive slurries under pressure or vacuum in: • Mineral processing plants • Sand and gravel industries • Dewatering duties • Lime transfer * Custom internal diameters are also available. ** Product specifications are subject to regional variations. Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0142/050217 Weir Minerals linatex@mail.weir www.minerals.weir Typical Physical Properties NOMINAL BORE NOMINAL OD LINER THICKNESS WEAR LINER TYPE MAX WP VACUUM RATING mm in mm in mm in kPa psi % 10 0 4 127 5.2 6 ¼ Linatex ® 1000 145 90 125 5 156 6.2 6 ¼ Linatex ® 1000 145 90 150 6 182 7. 2 6 ¼ Linatex ® 1000 145 90 200 8 238 9.2 6 ¼ Linatex ® 1000 145 90 250 10 288 11. 3 6 ¼ Linatex ® 1000 145 70 300 12 342 13.5 6 ¼ Linatex ® 1000 145 70 Wear liner composition is critical to the performance of your Linatex ® rubber hose. With over 90 years of rubber manufacturing experience, we have the expertise to select the best compound for your specified application. Our superior Linatex ® rubber compounds provide your application with outstanding wear resistance and extended wear life. This is designed to achieve the lowest total cost of ownership for all our hoses. For more information, please refer to our range of Linatex ® rubber technical specification sheets.