ENG - Linatex 800 Corrugated Cut End Hard Wall Hose Spec Sheet.pdf

Linatex ® Corrugated Cut End Hose & Couplings (800) Technical Specifications Exceptional abrasion resistance The Linatex ® 800 corrugated cut end hose and coupling system is an exceptionally abrasion resistant material handling hose suitable for suc\ tion and delivery applications. This versatile hose system allows the hose to be cut to the required length and fitted with our reusable couplings on site. The Linatex ® 800 hose range is readily stocked in common industry sizes and available in standard lengths, and is supported by our in-house range of bolt-on split cast couplings to create an economical ready-made hose solution. Design Features • Corrugated cover for additional flexibility, designed for suction and delivery • Versatile design allows for the hose to be cut to length on site • Reusable split cast couplings bolt together to create a reusable flange connection • Linatex ® premium rubber lined for dependable performance Properties • Nominal bores from 50mm (2”) to 350mm (14”)* • Working pressure rated to 1038 kPa (150 PSI) • Safety factor of 3:1 • Operating temperature -30°C to +75°C (-22°F to +167°F) • Locally stocked in standard lengths • Minimum bend radius of 8 times the internal diameter Minerals Applications The Linatex ® 800 corrugated cut end hose is an extremely versatile system and is extensively used in: • Mineral processing plants • Sand and gravel industries • Dewatering duties • General material handling * Product specifications are subject to regional variations. Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0147/052017 Weir Minerals linatex@mail.weir www.minerals.weir Typical Physical Properties NOMINAL BORE TUBE THICKNESS BEND RADIUS WEIGHT VACUUM HG WP COUPLING WEIGHT PER HOSE END mm in mm in mm in kg/m lbs/ft mm in psi kg lbs 50 2 3 1?8 406 16 2.4 1. 6 762.0 30 150 1.36 3 80 3 6 ¼ 6 10 24 6.1 4.1 762.0 30 150 2.04 4.5 10 0 4 6 ¼ 813 32 7. 3 4.9 635.0 25 150 3.18 7 150 6 10 3?8 12 19 48 12.5 8.4 762.0 30 150 4.99 11 200 8 10 3?8 1626 64 19.2 12.9 558.8 22 150 7.71 17 250 10 10 3?8 2032 80 29.8 20 762.0 30 150 11.79 26 300 12 10 3?8 2438 96 34.5 23.2 406.4 16 150 14.97 33 350 14 10 3?8 2845 11 2 40.8 27.4 279.4 11 150 18.60 41 Wear liner composition is critical to the performance of your Linatex ® rubber hose. With over 90 years of rubber manufacturing experience, we have the expertise to select the best compound for your specified application. Our superior Linatex ® rubber compounds provide your application with outstanding wear resistance and extended wear life. This is designed to achieve the lowest total cost of ownership for all our hoses. For more information, please refer to our range of Linatex ® rubber technical specification sheets.