fiche technique du tuyau linatex acid/chemical 700

Linatex® Acid/Chemical Hose (700)

Technical Specifications Minerals

Applications

• Pumping and transfer of abrasive and corrosive acids/chemicals for:
• Acid or alkaline leach circuits at atmospheric or pressure
• Effluent plants
• Fertiliser plants
• Pulp and paper plants

Customised abrasion and corrosion resistance

• The Linatex® 700 acid/chemical hose is tailor-made to handle abrasive acid and chemical process applications.
• Linatex® Rubber Technical Consultants have the expertise to deliver the best design for each application or duty.
• Every hose is individually designed to suit specific process parameters, with every element of the hose construction customizable.
• Hose design is constructed through a hot-vulcanisation process and is available as a suction-delivery or delivery-only design.

Design Features

• Tailored designs for abrasive and corrosive acid/chemical applications
• Manufactured with a broad range of flange materials to suit the application
• High tensile reinforcement with a steel wire helix

Properties

• Nominal bores from 50mm (2”) to 1000mm (40”)
• Lengths up to 15m (50ft)
• Operating temperature from -35°C to +105°C (-31°F to +221°F)
• Suction and discharge applications
• Compounds include SBR, OSR, Neoprene, EPDM, and Chlorobutyl liner options
• Typical bend radius of 8 times the internal diameter

Custom internal diameters are also available. Product specifications are subject to regional variations.

Wear Liner Composition

Wear liner composition is critical to the performance of your Linatex® rubber hose. With over 90 years of rubber manufacturing experience, we have the expertise to select the best compound for your specified application.

Our superior Linatex® rubber compounds provide outstanding wear resistance and extended wear life, designed to achieve the lowest total cost of ownership for all our hoses. For more information, please refer to our range of Linatex® rubber technical specification sheets.

Typical Physical Properties

• Nominal Bore:
• 50 mm (2 in): 6 mm liner thickness, 400 kPa, 1.31 ft bend radius
• 75 mm (3 in): 6 mm liner thickness, 600 kPa, 1.97 ft bend radius
• 100 mm (4 in): 6 mm liner thickness, 800 kPa, 2.62 ft bend radius
• 125 mm (5 in): 6 mm liner thickness, 1000 kPa, 3.28 ft bend radius
• 150 mm (6 in): 6 mm liner thickness, 1200 kPa, 3.94 ft bend radius
• 200 mm (8 in): 6 mm liner thickness, 1600 kPa, 5.25 ft bend radius
• 250 mm (10 in): 10 mm liner thickness, pressure to 2000 kPa, 6.56 ft bend radius
• 300 mm (12 in): 10 mm liner thickness, pressure to 5000 kPa, 7.87 ft bend radius
• 350 mm (14 in): 10 mm liner thickness, 2800 kPa, 9.19 ft bend radius
• 400 mm (16 in): 12 mm liner thickness, 3200 kPa, 10.50 ft bend radius
• 450 mm (18 in): 12 mm liner thickness, 4050 kPa, 13.29 ft bend radius
• 500 mm (20 in): 12 mm liner thickness, 5000 kPa, 16.40 ft bend radius
• 600 mm (24 in): 12 mm liner thickness, 7200 kPa, 23.62 ft bend radius

Weir Minerals
Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX, LINARD, LINACURE, LINAGARD and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0149/052017