présentation technique des broyeurs ECM 300, ECIMI650 et ECMI800

ECM! line

ECM 300 | ECIMI650 | ECMI800

• Electric motor (IE2):
  • ECM 300: max. 55 kW
  • ECIMI650: 75-90 kW
  • ECM800: 160 kW
• Capacity*:
  • ECM 300: 12-15 m³/h
  • ECIMI650: 25-30 m³/h
  • ECM800: 45 m³/h
• Noise level ca.:
  • ECM 300: 80 dB
  • ECIMI650: 90 dB
  • ECM800: 110 dB
• Weight** ca.:
  • ECM 300: 2300 kg
  • ECIMI650: 4700 kg
  • ECM800: 5050 kg
• Steel base frame: Yes for all models
• Measurements LxWxH:
  • ECM 300: 1.3x15x17m
  • ECIMI650: 23x15x17m
  • ECM800: 28x15x17m
• Max. input mat. size: 60x30x20 mm for all models
• Max. moisture content: 55% for all models
• Connection Clamp:
  • ECM 300: Stliwe
  • ECIMI650 & ECM800: Rexnord Viva
• Bearings: SKF or INA for all models
• Vibrating damper: Yes for all models
• Auger motor:
  • ECM 300: 3 KW
  • ECIMI650: 2 x 3 KW
  • ECM800: 2 x 3 KW
• Hammers: Hardened for all models
• Friction plates: Hardened for all models

Options:

• ATEX design
• Vibration measurement
• Bearing temperature measurement
• Production-related hammers
• Spark extinguishing system
• Turnkey infeed system
• Screen systems after Europe Chip Mill
• Material related
• Without steel base frame

Contact Information:
Europe Forestry V.O.F., Stegerdijk 13, The Netherlands
T. +31(0)529 45 12 66
www.europeforestry.com
info@europeforestry.com
“The cost efficient solution for wood chips grinding”

The Europe Chip Mills work with an innovative principle called friction grinding. This method of grinding woodchips offers the advantage of higher capacity with up to 40% less power consumption. The kinetic hammer effect of the swing hammers in combination with the specially designed and hardened friction plates is ideal for grinding wet wood chips. The full surface of the housing can be utilized with this principle. The patented system ensures a homogeneous end product with very low dust content, ideal for drying. The loading system with augers guarantees continuous feeding.

Features of the system:

• Special hardened friction plates guarantee high capacity and a homogeneous product.
• Free moving hammers for optimal grinding ability.
• Highest quality with rotor balancing according to DIN ISO 1940-1.

Many other options available for enhanced performance and efficiency.