datasheet-etg6500

ETG 6500 TOP MULTICOMPONENT ANALYZER FOR BIOGAS The ETG 6500 series of gas analyzers by ETG it ’s the ideal solution for biogas measurement and industrial combust ion applications because of their accuracy, stability, reliability, broad measurement range, and the variety of available form factors. Unlike other analyzers, ETG 6500 non-dispersive infrared (NDIR) gas analyzers measure multiple gases in an instrument w ith a single optical path platform. Single -gas analyzers are inadequate when using methane as a biofuel because the gas often contains large amounts of CO as a contaminant. ETG analyzers have the ability to measure CO2, CO, and O2 in addition to methane and therefore provide the optimal combination of gases for combustion optimization. The enhanced optics and electronics of our NDIR analyzers have virtually eliminated zero drift after the initial warm up period. The temperature and pressure compensation e liminates the major causes of span drift in many NDIR instruments. • Analysis of CO 2, CH 4, O 2, H 2S • NDIR technology for CO 2 and CH 4 • Automatic air purge for long life H 2S cell • Arm Processor • Touch Screen monitor • Ethernet and USB Remonting • Analog & Digital Signal Output • Low cost ownership • 19 “ Rack mounting or Wall mounting version • Modbus, Profibus, Ethernet ( optional) • Autozero • Data downloadable on SD Card T9 0 & T 10 <30 seconds +/- 3.0% rel +/- 3.0% rel 0-2000 ppm 0-5000 ppm 1 ppm Hydrogen Sulfide Electro - chemical sensor < 3 0 seconds from ambient to 0.15 O2 +/- 0,1% abs or +/- 1.5% rel +/- 0,1% abs or +/ - 3.0% rel 0-25.00% 0,01% Oxygen Elec tro- chemical sensor T90 & T 10 <10 seconds +/-0,7% +/- 0,1% abs or +/ - 0.8% rel +/- 0,8 F.S. +/ - 0,3% abs or +/ - 3.0% rel +/ - 5% rel 0-50% 0,01% Carbon Dioxide NDIR ( Non - Dispersive Infrared ) T90 & T 10 <10 seconds +/- 0,8% +/- 1% F.S. +/- 2% rel +/ - 1% rel +/- 5% rel 0-100% 0,01% Methane NDIR ( Non - Dispersive Infrared ) Time Precision Accuracy Range Resoluti on Gas Measurement Method 4-20 ma for each measured compound Analog Signal Output Ethernet – Profibus – Modbus and o thers on request Communications (optional) -300 to 3.000 m ( -1.000 to 10.000 ft ) Operating Altitude To 95% RH ( Non -condensing) Operating Humidity -10 °C to 70 ° C ( 32 ° to 158 ° F) Operating Temperature 30 seconds ready,3 minutes useable,30 minutes to full performance Warm -up Time 1 second Data Refresh Rate Response times are specified at a sample flow rate of a 1 liter per minute through the sample cell Response Time ETG6500 TOP MULTICOMPONENT ANALYZER FOR BIOGAS SPECIFICATIONS Other Version of Biogas Analyzers • Rack Mount Bioga s analyzer version model MCA100BIO • Porta ble Biogas analyzer model MCA 100 Bio P ETG RISORSE E TECNOLOGIA Via Baione 2/K 10034 Chivasso (TO ) ITALY Tel. +39 011 19270890 sales@etgrisorse.com www.analisi -biogas.com ww w.etgrisorse.com 15.75 kG Weight 850 x 900 x 3 50 mm Mechanical dimensions 6.0 OD 4.0 ID Pneumatic connection from 100 to 240 Vac 47 -63 Hz Electrical supply Zero & span user selectable. Automa tic calibration ( optional) Calibration Touch Screen 5.7 ” Resistive type Monitor Configurable for gas concentration, analyzer fault, high temperature , etc.. Digital Output ETG6500 MULTICOMPONENT ANALYZER FOR BIOGAS Mechanical Dimensions Overview User Monitor Interface Bargraph and digital value Trend and digital value All the ETG M CA 100 and 6500 series for Biogas have Remote Support and Remote Access • File transfer • Data monitoring by your PC , tablet smartphone • Software update